{"title":"Semi-Direct Solenoid Valves","description":"\u003cp\u003eSemi-direct solenoid valves, also called assisted-lift valves, sit somewhere between direct-acting and pilot-operated designs. The plunger is linked to the diaphragm, so when the coil is energized it physically lifts the diaphragm while line pressure helps push it open the rest of the way. In practice that means two things. They open at 0 psi like a direct-acting valve, and they still give you the larger flow you'd expect from a diaphragm valve once there's pressure in the line. That makes them a safe choice when you aren't sure how much pressure your system will see, or when it changes a lot, like a pump that cycles on and off or a tank that slowly drains down. You'll find both normally closed and normally open versions here, in brass and stainless steel, with 12V DC, 24V and 110\/220V AC coils. Since the coil does part of the lifting, it usually draws a bit more power than a pilot valve of the same size, so check the wattage on the product page if you're running off a battery or a small power supply.\u003c\/p\u003e","products":[{"product_id":"u-s-solid-electric-solenoid-valve-1-24v-dc-solenoid-valve-brass-body-normally-closed-viton-seal-html","title":"1\" Solenoid Valve - 24V DC Brass Electric Solenoid Valve, Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VDC-1.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VDC-1-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00064\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e12 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 24V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2.03 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.65\"x3.37\"x2.57\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918517326079,"sku":"JFSV00064","price":43.67,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918517358847,"sku":"JFSV00064-G","price":44.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00064_1__03365.1530339214.1280.1280.jpg?v=1762302846"},{"product_id":"u-s-solid-electric-solenoid-valve-1-110v-ac-solenoid-valve-brass-body-normally-closed-nbr-seal-html","title":"1\" Solenoid Valve - 110\/220V AC Brass Solenoid Valve, Normally Closed, NBR Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eNBR Seal: Featuring an oil-resistant NBR seal, this valve provides a budget-friendly solution for fuels, lubricants, and hydraulic fluids in moderate-temperature environments.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-2-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00013\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e12 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 110V \/ 220V , ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e22 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e23℉-176℉(-5℃-80℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, diesel oil, kerosene, etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.98 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.65\"x3.39\"x3.39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918539935999,"sku":"JFSV00013","price":44.79,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918539968767,"sku":"JFSV00013-G","price":41.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00013_1__34415.1530337416.1280.1280.jpg?v=1762302849"},{"product_id":"u-s-solid-electric-solenoid-valve-1-2-110v-ac-solenoid-valve-brass-body-normally-closed-viton-seal-html","title":"1\/2\" Solenoid Valve - 1\/2\" 110\/220V AC Electric Solenoid Valve Brass Body Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\u003cbr\u003eAlso available with stainless steel body: Item #\u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-electric-solenoid-valve-1-2-110v-ac-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html\" target=\"_blank\"\u003eUSS-SV0070\u003c\/a\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\/2\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-2-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00009\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.8 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 110V \/ 220V , ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e21 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.43 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2.93\"x2.21\"x4.23\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918535807231,"sku":"JFSV00009","price":32.7,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918535839999,"sku":"JFSV00009-G","price":31.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00009_1__55042.1530337217.1280.1280.jpg?v=1762302855"},{"product_id":"u-s-solid-electric-solenoid-valve-3-4-110v-ac-solenoid-valve-brass-body-normally-closed-viton-seal-html","title":"3\/4\" Solenoid Valve - 110\/220V AC Electric Solenoid Valve Brass Body Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\u003cbr\u003eAlso available with stainless steel body: Item #\u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-electric-solenoid-valve-3-4-110v-ac-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html\" target=\"_blank\"\u003eUSS2-00010\u003c\/a\u003e\u003cbr\u003e20-Pack Version: \u003ca href=\"https:\/\/ussolid.com\/products\/20-packs-electric-solenoid-valve-3-4-110v-ac-solenoid-valve-brass-body-normally-closed-viton-seal-by-u-s-solid-html?_pos=4\u0026amp;_sid=b27e8bbfb\u0026amp;_ss=r\" target=\"_blank\"\u003eUSS2-00301\u003c\/a\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (3\/4\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-2-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00007\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e7.6 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 110V \/ 220V , ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e21 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.59 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3.15\"x2.24\"x4.46\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918532923647,"sku":"JFSV00007","price":24.68,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918532956415,"sku":"JFSV00007-G","price":25.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/public__32320.1651805429.1280.1280.jpg?v=1762302965"},{"product_id":"u-s-solid-electric-solenoid-valve-1-110v-ac-solenoid-valve-brass-body-normally-closed-viton-seal-html","title":"1\" Solenoid Valve -  110\/220V AC Electric Brass Solenoid Valve, Normally Closed, VITON SEAL","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\"): Standard tapered threading for U.S. piping, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-2-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00002\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e12 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 110V \/ 220V , ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e21 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.96 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.75\"x3.37\"x2.60\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918522994943,"sku":"JFSV00002","price":49.75,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918523027711,"sku":"JFSV00002-G","price":43.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/public__84392.1652148371.1280.1280.jpg?v=1762302858"},{"product_id":"u-s-solid-electric-solenoid-valve-3-4-110v-ac-solenoid-valve-brass-body-normally-closed-nbr-seal-html","title":"3\/4\" Solenoid Valve - 110\/220V AC Electric Solenoid Valve Brass Body, Normally Closed, NBR Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (3\/4\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eNBR Seal: Featuring an oil-resistant NBR seal, this valve provides a budget-friendly solution for fuels, lubricants, and hydraulic fluids in moderate-temperature environments.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-2-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00014\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e7.6 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 110V \/ 220V , ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e22 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e23℉-176℉(-5℃-80℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, diesel oil, kerosene, etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.54 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.49\"x2.76\"x2.76\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918542328063,"sku":"JFSV00014","price":29.79,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918542360831,"sku":"JFSV00014-G","price":29.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00014_1__43507.1530337491.1280.1280.jpg?v=1731291326"},{"product_id":"u-s-solid-electric-solenoid-valve-1-12v-dc-solenoid-valve-brass-body-normally-closed-viton-seal-html","title":"1\" Solenoid Valve -  12V DC Electric Solenoid Valve Brass Body, Normally Closed, VITON SEAL","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\u003cbr\u003eAlso available with Stainless Steel body: Item # \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-electric-solenoid-valve-1-12v-dc-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html\" target=\"_blank\"\u003eUSS2-00076\u003c\/a\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-3.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-3-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00003\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e12 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 12V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.98 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.65\"x3.39\"x3.39\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918525878527,"sku":"JFSV00003","price":32.37,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918525911295,"sku":"JFSV00003-G","price":33.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/public__58555.1651805520.1280.1280.jpg?v=1762302865"},{"product_id":"u-s-solid-electric-solenoid-valve-1-2-24v-ac-solenoid-valve-brass-body-normally-closed-viton-seal-html","title":"1\/2\"  Solenoid Valve - 24V AC Electric Solenoid Valve Brass Normally Closed, VITON SEAL","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\/2\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VAC-1.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VAC-1-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00001\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.8 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 24V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e21 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.43 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.19\"x3.66\"x2.24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918519849215,"sku":"JFSV00001","price":30.81,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918519881983,"sku":"JFSV00001-G","price":29.92,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/public__24896.1652321439.1280.1280.jpg?v=1762302869"},{"product_id":"u-s-solid-electric-solenoid-valve-1-2-12v-dc-solenoid-valve-brass-body-normally-closed-viton-seal-html","title":"1\/2\" Solenoid Valve - 12V DC Electric Solenoid Valve Brass Normally Closed, VITON SEAL","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\/2\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-3.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-3-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00012\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.8 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 12V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.46 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.09\"x3.04\"x2.20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918538035455,"sku":"JFSV00012","price":31.29,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918538068223,"sku":"JFSV00012-G","price":27.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/public__89097.1651902018.1280.1280.jpg?v=1767591224"},{"product_id":"u-s-solid-electric-solenoid-valve-2-12v-dc-solenoid-valve-brass-body-normally-closed-viton-seal-html","title":"2\" Solenoid Valve - 12V DC Electric Solenoid Valve, Brass, Normally Closed, VITON SEAL","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (2\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-2-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00004\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e48 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 12V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e23 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e6.61 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e7.09\"x5.31\"x5.31\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918530105599,"sku":"JFSV00004","price":131.9,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918530138367,"sku":"JFSV00004-G","price":131.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/1_3_5__57796.1529033859.1280.1280.jpg?v=1762303333"},{"product_id":"u-s-solid-electric-solenoid-valve-3-4-12v-dc-solenoid-valve-brass-body-normally-closed-viton-seal-html","title":"3\/4\" 12V DC Solenoid Valve - Brass Body Normally Closed, VITON SEAL","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (3\/4\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-3.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-3-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00059\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e7.6 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 12V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.59 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.40\"x2.83\"x2.21\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918497566975,"sku":"JFSV00059","price":27.75,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918497599743,"sku":"JFSV00059-G","price":30.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/public__33356.1651902416.1280.1280.jpg?v=1767592167"},{"product_id":"u-s-solid-electric-solenoid-valve-3-4-24v-dc-solenoid-valve-brass-body-normally-closed-viton-seal-html","title":"3\/4\" 24V DC Solenoid Valve - Brass Body Normally Closed, VITON SEAL","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (3\/4\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VDC-1.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VDC-1-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00061\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e7.6 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 24V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.61 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.42\"x2.99\"x2.22\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918506742015,"sku":"JFSV00061","price":32.87,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918506774783,"sku":"JFSV00061-G","price":26.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00061_1__76955.1558589494.1280.1280.jpg?v=1762303008"},{"product_id":"u-s-solid-electric-solenoid-valve-3-4-110v-ac-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html","title":"3\/4\" Solenoid Valve - 110\/220V AC  Stainless Steel Electric Solenoid Valve, Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\u003cbr\u003eAlso available with brass body: Item # \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-electric-solenoid-valve-3-4-110v-ac-solenoid-valve-brass-body-normally-closed-viton-seal-html\" target=\"_blank\"\u003eUSS2-00007\u003c\/a\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (3\/4\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from corrosion-resistant stainless steel. Suitable for drinking water applications (compliant with standards).\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-110VAC-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-110VAC-2-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00010\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e7.6 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 110V \/ 220V , ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e21 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.76 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2.98\"x2.27\"x4.56\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e This solenoid valve is made of food-grade stainless steel, meeting drinking water standards. It is safe for potable water with no lead risk (unlike brass valves).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918494814463,"sku":"JFSV00010","price":48.25,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918494847231,"sku":"JFSV00010-G","price":45.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00010_1__73104.1529464808.1280.1280.jpg?v=1767590554"},{"product_id":"u-s-solid-electric-solenoid-valve-1-110v-ac-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html","title":"1\" Solenoid Valve - 110\/220V AC  Stainless Steel Electric Solenoid Valve, Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\u003cbr\u003eAlso available with brass body: Item # \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-electric-solenoid-valve-1-110v-ac-solenoid-valve-brass-body-normally-closed-viton-seal-html\" target=\"_blank\"\u003eUSS2-00002\u003c\/a\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from corrosion-resistant stainless steel. Suitable for drinking water applications (compliant with standards).\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-110VAC-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-110VAC-2-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00011\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e12 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 110V \/ 220V , ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e22 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2.56 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3.86\"x3.04\"x4.99\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e This solenoid valve is made of food-grade stainless steel, meeting drinking water standards. It is safe for potable water with no lead risk (unlike brass valves).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918493372671,"sku":"JFSV00011","price":68.25,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918493405439,"sku":"JFSV00011-G","price":64.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/public__25478.1652321942.1280.1280.jpg?v=1767590516"},{"product_id":"u-s-solid-electric-solenoid-valve-3-4-24v-ac-solenoid-valve-brass-body-normally-closed-viton-seal-html","title":"3\/4\" Solenoid Valve- 24V AC Brass Electric Solenoid Valve, Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (3\/4\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VAC-1.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VAC-1-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00060\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e7.6 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 24V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20.5 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.54 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.49\"x2.76\"x2.76\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918502482175,"sku":"JFSV00060","price":38.72,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918502514943,"sku":"JFSV00060-G","price":38.72,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00060_1__73255.1529462477.1280.1280.jpg?v=1762303022"},{"product_id":"u-s-solid-electric-solenoid-valve-1-12v-dc-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html","title":"1\" Solenoid Valve - 12V DC Stainless Steel Electric Solenoid Valve, Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\u003cbr\u003eAlso available with brass body: Item # \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-electric-solenoid-valve-1-12v-dc-solenoid-valve-brass-body-normally-closed-viton-seal-html\" target=\"_blank\"\u003eUSS2-00003\u003c\/a\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from corrosion-resistant stainless steel. Suitable for drinking water applications (compliant with standards).\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-12VDC-3.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-12VDC-3-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00076\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e12 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 12V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2.56 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.88\"x3.88\"x3.02\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e This solenoid valve is made of food-grade stainless steel, meeting drinking water standards. It is safe for potable water with no lead risk (unlike brass valves).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918490456319,"sku":"JFSV00076","price":67.54,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918490489087,"sku":"JFSV00076-G","price":62.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/71jmiufertl._aa1500__1__27751.1529464960.1280.1280.jpg?v=1762302890"},{"product_id":"u-s-solid-electric-solenoid-valve-1-2-12v-dc-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html","title":"1\/2\" Solenoid Valve - 12V DC Stainless Steel Electric Solenoid Valve Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\u003cbr\u003e\u003cstrong\u003e20-PACK\u003c\/strong\u003e version: \u003ca href=\"https:\/\/ussolid.com\/products\/1-2-stainless-steel-electric-solenoid-valve-12v-dc-normally-closed-20-pcs-html\" target=\"_blank\"\u003eUSS2-00303\u003c\/a\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\/2\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from corrosion-resistant stainless steel. Suitable for drinking water applications (compliant with standards).\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-12VDC-3.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-12VDC-3-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00069\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.8 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 12V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.68 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.33\"x2.96\"x2.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e This solenoid valve is made of food-grade stainless steel, meeting drinking water standards. It is safe for potable water with no lead risk (unlike brass valves).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46916702175487,"sku":"JFSV00069","price":39.91,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46916702208255,"sku":"JFSV00069-G","price":41.17,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/public__26083.1651902595.1280.1280.jpg?v=1762302892"},{"product_id":"u-s-solid-electric-solenoid-valve-1-24v-ac-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html","title":"1\" Solenoid Valve - 24V AC Stainless Steel Electric Solenoid Valve, Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from corrosion-resistant stainless steel. Suitable for drinking water applications (compliant with standards).\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-24VAC-1.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-24VAC-1-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00077\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e12 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 24V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e19.2 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2.49 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.93\"x3.86\"x3.07\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e This solenoid valve is made of food-grade stainless steel, meeting drinking water standards. It is safe for potable water with no lead risk (unlike brass valves).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918490915071,"sku":"JFSV00077","price":62.04,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918490947839,"sku":"JFSV00077-G","price":63.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/71jmiufertl._aa1500___77215.1529464892.1280.1280.jpg?v=1762302894"},{"product_id":"u-s-solid-electric-solenoid-valve-3-4-24v-ac-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html","title":"3\/4\" Solenoid Valve - 24V AC Stainless Steel Electric Solenoid Valve, Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (3\/4\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from corrosion-resistant stainless steel. Suitable for drinking water applications (compliant with standards).\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-24VAC-1.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-24VAC-1-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00074\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e7.6 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 24V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.83 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.49\"x2.76\"x2.76\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e This solenoid valve is made of food-grade stainless steel, meeting drinking water standards. It is safe for potable water with no lead risk (unlike brass valves).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46916718854399,"sku":"JFSV00074","price":45.04,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46916718887167,"sku":"JFSV00074-G","price":45.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00074_1__40546.1529461084.1280.1280.jpg?v=1762302897"},{"product_id":"u-s-solid-electric-solenoid-valve-1-2-24v-dc-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html","title":"1\/2\" Solenoid Valve - 24V DC Stainless Steel Electric Solenoid Valve, Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\/2\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from corrosion-resistant stainless steel. Suitable for drinking water applications (compliant with standards).\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-24VDC-1.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-24VDC-1-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00072\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.8 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 24V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.68 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.34\"x3.09\"x2.24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e This solenoid valve is made of food-grade stainless steel, meeting drinking water standards. It is safe for potable water with no lead risk (unlike brass valves).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46916711022847,"sku":"JFSV00072","price":39.08,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46916711055615,"sku":"JFSV00072-G","price":40.25,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/public__14496.1652321751.1280.1280.jpg?v=1767592703"},{"product_id":"u-s-solid-electric-solenoid-valve-1-2-110v-ac-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html","title":"1\/2\" 110\/220V AC Solenoid Valve, Stainless Steel, Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\u003cbr\u003eAlso available with brass body: Item # \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-electric-solenoid-valve-1-2-110v-ac-solenoid-valve-brass-body-normally-closed-viton-seal-html\" target=\"_blank\"\u003eUSS2-00009\u003c\/a\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\/2\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from corrosion-resistant stainless steel. Suitable for drinking water applications (compliant with standards).\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-110VAC-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-110VAC-2-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00070\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.8 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 110V \/ 220V , ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e21 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.65 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.31\"x2.94\"x2.23\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e This solenoid valve is made of food-grade stainless steel, meeting drinking water standards. It is safe for potable water with no lead risk (unlike brass valves).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46916705026303,"sku":"JFSV00070","price":39.41,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46916705059071,"sku":"JFSV00070-G","price":41.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00070_1__13388.1529461467.1280.1280.jpg?v=1767592478"},{"product_id":"1-2-brass-electric-solenoid-valve-24vac-nbr-seal-n-c-air-gas-fuel-html","title":"1\/2\" 24V AC Solenoid Valve, Brass, Normally Closed, NBR Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\/2\"): Standard tapered threading for U.S. piping, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eNBR Seal: Featuring an oil-resistant NBR seal, this valve provides a budget-friendly solution for fuels, lubricants, and hydraulic fluids in moderate-temperature environments.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VAC-5.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VAC-5-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00086\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.8 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 24V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20.5 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, diesel oil, kerosene, etc.\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, diesel oil, kerosene, etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.43 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.13\"x2.36\"x2.36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918855491839,"sku":"JFSV00086","price":29.79,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918855524607,"sku":"JFSV00086-G","price":29.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00086_1__76747.1530336323.1280.1280.jpg?v=1762302906"},{"product_id":"u-s-solid-electric-solenoid-valve-1-2-24v-ac-solenoid-valve-brass-body-normally-open-nbr-seal-html","title":"1\/2\" 24V AC Solenoid Valve, Brass, Normally Open, NBR Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. With a junction box connection, it offers secure wiring protection, making it ideal for harsh environments where dust, moisture, or vibration may be a concern. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eJunction box: Provides secure wiring protection for harsh environments (dust, moisture, vibration).\u003c\/li\u003e\n\u003cli\u003eNormally Open: Open when unpowered, closes when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\/2\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eNBR Seal: Featuring an oil-resistant NBR seal, this valve provides a budget-friendly solution for fuels, lubricants, and hydraulic fluids in moderate-temperature environments.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VAC-1.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VAC-1-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00079\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eJunction Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Open\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.8 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 24V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e21 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e23℉-176℉(-5℃-80℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar(0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, diesel oil, kerosene, etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.81 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.80\"x3.70\"x2.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918647513343,"sku":"JFSV00079","price":32.39,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918647546111,"sku":"JFSV00079-G","price":32.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00079_1__81715.1529460941.1280.1280.jpg?v=1763442985"},{"product_id":"u-s-solid-electric-solenoid-valve-1-24v-ac-solenoid-valve-brass-body-normally-closed-viton-seal-html","title":"1\" Solenoid Valve - 24V AC Brass Electric Solenoid Valve, Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VAC-1.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VAC-1-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00063\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e12 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 24V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e21 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.98 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.78\"x3.37\"x2.58\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918509232383,"sku":"JFSV00063","price":42.03,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918509265151,"sku":"JFSV00063-G","price":42.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/public__01911.1652322078.1280.1280.jpg?v=1762302910"},{"product_id":"u-s-solid-electric-solenoid-valve-3-4-12v-dc-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html","title":"3\/4\" 12V DC Solenoid Valve, Stainless Steel, Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (3\/4\"): Standard tapered threading for U.S. piping, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from corrosion-resistant stainless steel. Suitable for drinking water applications (compliant with standards).\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-12VDC-4.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-12VDC-4-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00073\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e7.6 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 12V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.83 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.59\"x3.04\"x2.24\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e This solenoid valve is made of food-grade stainless steel, meeting drinking water standards. It is safe for potable water with no lead risk (unlike brass valves).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46916712988927,"sku":"JFSV00073","price":53.46,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46916713021695,"sku":"JFSV00073-G","price":45.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00073_2__85847.1530339418.1280.1280.jpg?v=1762303036"},{"product_id":"u-s-solid-electric-solenoid-valve-3-4-24v-dc-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html","title":"3\/4\" 24V DC Solenoid Valve, Stainless Steel,Normally Closed, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (3\/4\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from corrosion-resistant stainless steel. Suitable for drinking water applications (compliant with standards).\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-24VDC-1.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-24VDC-1-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00075\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e7.6 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 24V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.83 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.56\"x2.96\"x2.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e This solenoid valve is made of food-grade stainless steel, meeting drinking water standards. It is safe for potable water with no lead risk (unlike brass valves).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918487113983,"sku":"JFSV00075","price":44.99,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918487146751,"sku":"JFSV00075-G","price":45.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00075_3__79495.1529461048.1280.1280.jpg?v=1762303038"},{"product_id":"u-s-solid-electric-solenoid-valve-1-2-12v-dc-solenoid-valve-brass-body-normally-open-nbr-seal-html","title":"1\/2\" 12V DC Solenoid Valve, Brass, Normally Open, NBR Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. With a junction box connection, it offers secure wiring protection, making it ideal for harsh environments where dust, moisture, or vibration may be a concern. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eJunction box: Provides secure wiring protection for harsh environments (dust, moisture, vibration).\u003c\/li\u003e\n\u003cli\u003eNormally Open: Open when unpowered, closes when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\/2\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eNBR Seal: Featuring an oil-resistant NBR seal, this valve provides a budget-friendly solution for fuels, lubricants, and hydraulic fluids in moderate-temperature environments.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-3.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-3-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00078\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eJunction Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Open\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.8 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 12V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e19 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e23℉-176℉(-5℃-80℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar(0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, diesel oil, kerosene, etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.79 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.80\"x2.24\"x3.58\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918644826367,"sku":"JFSV00078","price":38.15,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918644859135,"sku":"JFSV00078-G","price":39.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00078_1__55741.1529460995.1280.1280.jpg?v=1763443035"},{"product_id":"u-s-solid-electric-solenoid-valve-3-4-12v-dc-solenoid-valve-brass-body-normally-open-viton-seal-html","title":"3\/4\" 12V DC Solenoid Valve, Brass, Normally Open, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. With a junction box connection, it offers secure wiring protection, making it ideal for harsh environments where dust, moisture, or vibration may be a concern. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eJunction box: Provides secure wiring protection for harsh environments (dust, moisture, vibration).\u003c\/li\u003e\n\u003cli\u003eNormally Open: Open when unpowered, closes when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (3\/4\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-3.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-3-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00025\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eJunction Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Open\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e7.6 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eVITON\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 12V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar(0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.98 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.80\"x3.43\"x3.43\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918812139775,"sku":"JFSV00025","price":41.69,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918812172543,"sku":"JFSV00025-G","price":42.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/71YARDDaDVL._AC_SL1500.jpg?v=1762303040"},{"product_id":"u-s-solid-1-2-brass-electric-solenoid-valve-24v-dc-normally-closed-viton-air-water-oil-fuel-html","title":"1\/2\" Brass Solenoid Valve - 24V DC, Normally Closed VITON seal for Air Water Oil Fuel","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\/2\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VDC-3.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-24VDC-3-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00031\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.8 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 24V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.43 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.13\"x2.36\"x2.36\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918852935935,"sku":"JFSV00031","price":24.68,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918852968703,"sku":"JFSV00031-G","price":26.82,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00031_1__74959.1586237316.1280.1280.jpg?v=1762302754"},{"product_id":"u-s-solid-electric-solenoid-valve-1-2-24v-ac-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html","title":"1\/2\" 24V AC Solenoid Valve - Stainless Steel, Normally Closed, Viton Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\/2\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from corrosion-resistant stainless steel. Suitable for drinking water applications (compliant with standards).\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-24VAC-1.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-24VAC-1-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00071\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eStainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.8 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 24V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.65 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.33\"x2.24\"x2.99\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-ss-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eYes.\u003c\/strong\u003e This solenoid valve is made of food-grade stainless steel, meeting drinking water standards. It is safe for potable water with no lead risk (unlike brass valves).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46916709482751,"sku":"JFSV00071","price":38.77,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46916709515519,"sku":"JFSV00071-G","price":40.27,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00071_1__19736.1529461436.1280.1280.jpg?v=1762302922"},{"product_id":"u-s-solid-electric-solenoid-valve-1-2-110v-ac-solenoid-valve-brass-body-normally-open-nbr-seal-html","title":"Solenoid Valve - 1\/2\" 110\/220V AC Electric Solenoid Valve Brass Body Normally Open, NBR Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. With a junction box connection, it offers secure wiring protection, making it ideal for harsh environments where dust, moisture, or vibration may be a concern. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eJunction box: Provides secure wiring protection for harsh environments (dust, moisture, vibration).\u003c\/li\u003e\n\u003cli\u003eNormally Open: Open when unpowered, closes when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\/2\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eNBR Seal: Featuring an oil-resistant NBR seal, this valve provides a budget-friendly solution for fuels, lubricants, and hydraulic fluids in moderate-temperature environments.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-4.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-4-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00080\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eJunction Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Open\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.8 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNBR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 110V \/ 220V , ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e22.8 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e23℉-176℉(-5℃-80℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar(0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, diesel oil, kerosene, etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.72 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.78\"x3.82\"x2.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918934495487,"sku":"JFSV00080","price":38.49,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918934528255,"sku":"JFSV00080-G","price":38.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00080_1__70025.1605150716.1280.1280.jpg?v=1762302926"},{"product_id":"u-s-solid-electric-solenoid-valve-1-110v-ac-solenoid-valve-brass-body-normally-open-viton-seal-html","title":"Solenoid Valve - 1\" 110\/220V AC Electric Solenoid Valve Brass Body Normally Open, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. With a junction box connection, it offers secure wiring protection, making it ideal for harsh environments where dust, moisture, or vibration may be a concern. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eJunction box: Provides secure wiring protection for harsh environments (dust, moisture, vibration).\u003c\/li\u003e\n\u003cli\u003eNormally Open: Open when unpowered, closes when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-4.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-4-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00027\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eJunction Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Open\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e12 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 110V \/ 220V , ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e22 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar(0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2.16 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e5.32\"x4.06\"x2.59\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918641418495,"sku":"JFSV00027","price":57.2,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918641451263,"sku":"JFSV00027-G","price":57.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00027_1__53641.1559625592.1280.1280.jpg?v=1762302931"},{"product_id":"u-s-solid-electric-solenoid-valve-3-4-110v-ac-solenoid-valve-brass-body-normally-open-viton-seal-html","title":"Solenoid Valve- 3\/4\" 110\/220V AC Electric Solenoid Valve Brass Body Normally Open, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. With a junction box connection, it offers secure wiring protection, making it ideal for harsh environments where dust, moisture, or vibration may be a concern. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eJunction box: Provides secure wiring protection for harsh environments (dust, moisture, vibration).\u003c\/li\u003e\n\u003cli\u003eNormally Open: Open when unpowered, closes when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (3\/4\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-4.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-4-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00026\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eJunction Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Open\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e7.6 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 110V \/ 220V , ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e22 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar(0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1.79 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e5.04\"x2.24\"x3.74\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918875218175,"sku":"JFSV00026","price":40.69,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918875250943,"sku":"JFSV00026-G","price":41.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00026_1__94423.1559625221.1280.1280.jpg?v=1762303045"},{"product_id":"u-s-solid-electric-solenoid-valve-1-12v-dc-solenoid-valve-brass-body-normally-open-viton-seal-html","title":"Solenoid Valve- 1\" 12V DC Electric Solenoid Valve Brass Body Normally Open, VITON Seal","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. With a junction box connection, it offers secure wiring protection, making it ideal for harsh environments where dust, moisture, or vibration may be a concern. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\n        \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eJunction box: Provides secure wiring protection for harsh environments (dust, moisture, vibration).\u003c\/li\u003e\n\u003cli\u003eNormally Open: Open when unpowered, closes when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (1\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-3.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-12VDC-3-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00028\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e1\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eJunction Box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Open\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e12 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eDC 12V, ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar(0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e2.20 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eProduct Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e4.80\"x3.43\"x3.43\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918642893055,"sku":"JFSV00028","price":44.79,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918642925823,"sku":"JFSV00028-G","price":57.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/JFSV00028_1__37706.1559625790.1280.1280.jpg?v=1762302935"},{"product_id":"u-s-solid-solenoid-valve-1-2-zinc-alloy-12v-dc-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 1\/2\" Zinc Alloy 12V DC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px;color:black; font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00001\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e1\/2\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e16 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDC 12V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e20 W\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e4.8 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00001\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e1\/2\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e16 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDC 12V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e20 W\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e4.8 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918472728831,"sku":"JFZSV00001","price":16.55,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918472761599,"sku":"JFZSV00101","price":18.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/1__10417.1667354630.1280.1280.jpg?v=1762303052"},{"product_id":"u-s-solid-solenoid-valve-1-zinc-alloy-12v-dc-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 1\" Zinc Alloy 12V DC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; color:black;font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00003\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e1\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e25 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDC 12V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e20 W\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e12 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00003\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e1\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e25 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDC 12V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e20 W\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e12 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918470926591,"sku":"JFZSV00003","price":29.39,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918470959359,"sku":"JFZSV00103","price":33.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/1__88119.1645515108.1280.1280.jpg?v=1762303054"},{"product_id":"u-s-solid-solenoid-valve-3-4-zinc-alloy-110v-ac-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 3\/4\" Zinc Alloy 110\/220V AC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; color:black;font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00005\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e3\/4\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e20 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAC 110V\/220V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e7.6 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00005\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e3\/4\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e20 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAC 110V\/220V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e7.6 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918469452031,"sku":"JFZSV00005","price":26.49,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918469484799,"sku":"JFZSV00105","price":26.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/1__13597.1645515242.1280.1280.jpg?v=1762303056"},{"product_id":"u-s-solid-solenoid-valve-3-4-zinc-alloy-12v-dc-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 3\/4\" Zinc Alloy 12V DC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px;color:black; font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00002\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e3\/4\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e20 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDC 12V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e20 W\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e7.6 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00002\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e3\/4\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e20 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDC 12V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e20 W\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e7.6 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918468796671,"sku":"JFZSV00002","price":28.55,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918468829439,"sku":"JFZSV00102","price":28.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/1__71067.1657162519.1280.1280.jpg?v=1762303058"},{"product_id":"u-s-solid-solenoid-valve-1-2-zinc-alloy-110v-ac-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 1\/2\" Zinc Alloy 110\/220V AC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px;color:black; font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00004\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e1\/2\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e16 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAC 110V\/220V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e4.8 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00004\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e1\/2\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e16 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAC 110V\/220V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e4.8 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918467420415,"sku":"JFZSV00004","price":23.49,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918467453183,"sku":"JFZSV00104","price":23.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/1__49058.1657162973.1280.1280.jpg?v=1762303061"},{"product_id":"u-s-solid-solenoid-valve-3-8-zinc-alloy-12v-dc-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 3\/8\" Zinc-Alloy 12V DC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-07.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY-07.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px;color:black; font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00008\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e3\/8\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e4 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDC 12V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e20 W\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e0.6 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-07-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY-07.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00008\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e3\/8\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e4 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDC 12V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e20 W\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e0.6 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918466437375,"sku":"JFZSV00008","price":22.65,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918466470143,"sku":"JFZSV00108","price":21.98,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/8__51212.1668565936.1280.1280.jpg?v=1762303063"},{"product_id":"u-s-solid-solenoid-valve-1-4-zinc-alloy-110v-ac-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 1\/4\" Zinc-Alloy 110\/220V AC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-07.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY-07.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px;color:black; font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00009\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e1\/4\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e2.5 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAC 110V\/220V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e0.23 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-07-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY-07.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00009\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e1\/4\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e2.5 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAC 110V\/220V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e0.23 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918443892991,"sku":"JFZSV00009","price":11.89,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918443925759,"sku":"JFZSV00109","price":12.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/6__34378.1668566148.1280.1280.jpg?v=1762303065"},{"product_id":"u-s-solid-solenoid-valve-1-4-zinc-alloy-12v-dc-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 1\/4\" Zinc-Alloy 12V DC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-07.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY-07.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px;color:black; font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00007\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e1\/4\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e2.5 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDC 12V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e20 W\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e0.23 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-07-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY-07.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00007\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e1\/4\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e2.5 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDC 12V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e20 W\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e0.23 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918443729151,"sku":"JFZSV00007","price":15.65,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918443761919,"sku":"JFZSV00107","price":16.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/6__29551.1668566170.1280.1280.jpg?v=1762303068"},{"product_id":"u-s-solid-solenoid-valve-3-8-zinc-alloy-24v-ac-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 3\/8\" Zinc-Alloy 24V AC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-07.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY-07.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px;color:black; font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00012\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e3\/8\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e4 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAC 24V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e0.6 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-07-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY-07.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00012\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e3\/8\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e4 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAC 24V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e0.6 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918443172095,"sku":"JFZSV00012","price":20.59,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918443204863,"sku":"JFZSV00112","price":22.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/8__91607.1668566882.1280.1280.jpg?v=1762303070"},{"product_id":"u-s-solid-solenoid-valve-1-zinc-alloy-110v-ac-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 1\" Zinc-Alloy 110\/220V AC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px;color:black; font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00006\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e1\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e25 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAC 110V\/220V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e12.0 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00006\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e1\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e25 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAC 110V\/220V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e12.0 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918440911103,"sku":"JFZSV00006","price":34.89,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918440943871,"sku":"JFZSV00106","price":33.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/1__13130.1668564201.1280.1280.jpg?v=1762303072"},{"product_id":"u-s-solid-solenoid-valve-3-8-zinc-alloy-110v-ac-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 3\/8\" Zinc-Alloy 110\/220V AC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-07.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY-07.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px;color:black; font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00010\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e3\/8\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e4 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAC 110V\/220V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e0.6 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-07-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY-07.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00010\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e3\/8\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e4 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAC 110V\/220V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e0.6 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":46918440616191,"sku":"JFZSV00010","price":22.89,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":46918440648959,"sku":"JFZSV00110","price":22.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/8__68544.1668565301.1280.1280.jpg?v=1762303074"},{"product_id":"u-s-solid-solenoid-valve-1-2-zinc-alloy-24v-ac-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 1\/2\" Zinc-Alloy 24V AC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px;color:black; font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00013\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e1\/2\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e16 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAC 24V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e4.8 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00013\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e1\/2\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e16 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAC 24V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e4.8 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918440255743,"sku":"JFZSV00013","price":24.59,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918440288511,"sku":"JFZSV00113","price":25.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/1__72220.1668567325.1280.1280.jpg?v=1762303077"},{"product_id":"u-s-solid-solenoid-valve-3-4-zinc-alloy-24v-ac-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 3\/4\" Zinc-Alloy 24V AC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px;color:black; font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00014\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e3\/4\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e20 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAC 24V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e7.6 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00014\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e3\/4\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e20 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAC 24V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e7.6 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918439174399,"sku":"JFZSV00014","price":30.59,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918439207167,"sku":"JFZSV00114","price":30.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/1__90225.1668567482.1280.1280.jpg?v=1762303079"},{"product_id":"u-s-solid-solenoid-valve-1-4-zinc-alloy-24v-ac-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 1\/4\" Zinc-Alloy 24V AC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-07.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY-07.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px;color:black; font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00011\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e1\/4\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e2.5 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAC 24V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e0.23 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-07-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY-07.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00011\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e1\/4\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e2.5 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAC 24V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e0.23 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918438256895,"sku":"JFZSV00011","price":14.59,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918438289663,"sku":"JFZSV00111","price":16.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/6__01549.1668566694.1280.1280.jpg?v=1762303081"},{"product_id":"u-s-solid-solenoid-valve-1-zinc-alloy-24v-ac-solenoid-valve-nbr-seal-html","title":"U.S. Solid Solenoid Valve - 1\" Zinc-Alloy 24V AC Solenoid Valve, NBR Seal, Normally Closed","description":"\u003cbody\u003e \n\n\n    \u003cstyle\u003e\n        @media only screen and (max-width: 600px) {\n        }\n    \u003c\/style\u003e\n\n\n    \u003cdiv class=\"desktop-only\"\u003e\n       \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; line-height: 26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 10px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n        \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n             \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd style=\"width: 50%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 50px;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px;color:black; font-weight: bold;\"\u003ePOLARITY\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:30px;\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n          \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e \n \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00015\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e1\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e25 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAC 24V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e12 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003cdiv style=\"width: 100%; overflow-x: auto;margin-top:20px;\"\u003e\n    \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n        \u003ctr\u003e\n            \u003ctd valign=\"top\" style=\"width: 100%;text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cp style=\"margin-top: 0px;color:black;margin-bottom: 0px;\"\u003e\u003cspan style=\"font-size: 22px; font-weight: bold;\"\u003eOVER HEATING\u003c\/span\u003e\u003c\/p\u003e\n                \u003cp style=\"line-height: 2;margin-top:20px;\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e\n            \u003c\/td\u003e\n            \u003ctd style=\"width: 60%; text-align: left; padding: 5px; font-size: 16px; border: 0px; background-color: #FFFFFF;\"\u003e\n                \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n            \u003c\/td\u003e\n        \u003c\/tr\u003e\n    \u003c\/table\u003e\n\u003c\/div\u003e\n    \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:20px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cdiv class=\"mobile-only\"\u003e\n      \n        \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/coverimage.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n        \u003cp style=\"font-size: 22px; text-align: left; margin-top:0px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cp style=\"font-size: 16px; line-height:26px; margin-bottom:0px; margin-left: 0px;margin-right: 0px; margin-top: 0px; color: black; font-family: Arial;\"\u003eThe U.S. Solid USS-ZSV Series Zinc-alloy Solenoid Valves are engineered with both performance and cost-effectiveness in mind.  These valves utilize a zinc alloy valve body, a material selected for its ability to withstand significant pressure while offering a more economical solution than brass or stainless steel.  This series is designed to be a reliable and affordable option for various applications, making it a valuable addition to your toolkit.\u003c\/p\u003e\n            \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n            \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/features-01-APP.png\" style=\"flex: 1; margin: 0px; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n                \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\n                 \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFNSV\/Application-APP.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n\u003c\/div\u003e\n   \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003ePOLARITY\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eWhen dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. \u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/POLARITY.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n      \u003cp style=\"font-size: 16px; text-align: left; margin-bottom:10px; margin-top:20px;color: black;\"\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n           \u003cdiv style=\"width: 100%; overflow-x: auto;\"\u003e\n        \u003ctable style=\"border-collapse: collapse; border: 0px; width: 100%; font-family: Arial; overflow-x: auto; background-color: #FFFFFF;\"\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eModel\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eUSS-ZSV00015\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eBrand\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eU.S. Solid\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSize\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e1\"\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Aperture\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e25 mm\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eValve Material\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eZinc Alloy\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eGasket \/ Diaphragm \/ Seal\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNBR\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eRated Voltage\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAC 24V\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperational pressure range\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eAir\/Water: 0-8 Bar (0 to 116 PSI); Oil: 0-5 Bar(0 to 72 PSI)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003ePower Rating\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e22 VA\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperation Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eDirect Lift Valve\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eSuitable Media\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eWater, oil, Diesel fuel, kerosene etc.\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eFlow Value\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e12 Cv\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr style=\"border-bottom: 1px dashed black;\"\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature, Minimum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e14 degrees Fahrenheit (-10 degrees Celsius)\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eTemperature Maximum\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003e176 degrees Fahrenheit (80 degrees Celsius)\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eThread Type\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNPT\/G\u003c\/td\u003e\n                \u003cth style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #f0f0f0; color: black;\"\u003eOperating State\u003c\/th\u003e\n                \u003ctd style=\"width: 100%; text-align: left; padding: 5px; font-size: 14px; border: 0px; background-color: #FFFFFF;\"\u003eNormally Closed\u003c\/td\u003e\n            \u003c\/tr\u003e\n        \u003c\/table\u003e\n    \u003c\/div\u003e\n\u003cp style=\"font-size: 22px; font-family: Arial; text-align: left; margin-top:20px; margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eCE CERTIFIED QUALITY \u0026amp; SAFETY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE-EMC.jpg\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n           \u003cp style=\"font-size: 22px; text-align: left; margin-bottom:10px; margin-top:20px; color: black;\"\u003e\u003cstrong\u003eOVER HEATING\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB\/T7352-2010. If energized continuously for more than 8 hours the coil may burn.\u003c\/p\u003e \n     \u003cimg src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFZSV\/overheating.png\" style=\"flex: 1; border: 0px; max-width: 100%;\" alt=\"\"\u003e\n       \u003cdiv style=\"flex: 1; padding: 0px; font-family: Arial;line-height: 26px;\"\u003e\n       \u003cp style=\"font-size: 22px; text-align: left; margin-top:20px;margin-bottom:10px;color: black;\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e1. Can it be used outdoors? \u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eSolenoid valves can withstand water spray. However, if they are to be permanently installed outdoors, it’s advisable to house them in a protective enclosure. This helps safeguard the valves and ensures their long - term durability.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e2. Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eThese valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e3.How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eIt is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003e\u003cb\u003e4.Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n        \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eYes. This valve is crafted from zinc alloy. Zinc alloy is free of lead, making it suitable for use in drinking water systems.\u003c\/p\u003e\n    \u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n  \u003cp style=\"font-size: 16px; margin-top:5px;margin-bottom:5px;line-height: 26px;color: black\"\u003eDownload user manual \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n    \u003cscript\u003e\n      \n        const isMobile = window.matchMedia(\"only screen and (max-width: 600px)\").matches;\n        const desktopContent = document.querySelector('.desktop-only');\n        const mobileContent = document.querySelector('.mobile-only');\n\n        if (isMobile) {\n           \n            console.log('');\n           \n            desktopContent.style.display = 'none';\n            mobileContent.style.display = 'block';\n        } else {\n            \n            console.log('');            \n            \n            desktopContent.style.display = 'block';\n            mobileContent.style.display = 'none';\n        }\n    \u003c\/script\u003e\n\n\n\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"NPT","offer_id":46918436323583,"sku":"JFZSV00015","price":34.59,"currency_code":"USD","in_stock":true},{"title":"G","offer_id":46918436356351,"sku":"JFZSV00115","price":35.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/1__71457.1668567644.1280.1280.jpg?v=1762303083"},{"product_id":"20-packs-electric-solenoid-valve-3-4-110v-ac-solenoid-valve-brass-body-normally-closed-viton-seal-by-u-s-solid-html","title":"20 Packs Electric Solenoid Valve- 3\/4\" 110\/220V AC Solenoid Valve Brass Body Normally Closed, VITON SEAL by U.S. Solid","description":"\u003cbody\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cmeta content=\"width=device-width, initial-scale=1.0\" name=\"viewport\"\u003e\n\u003ctitle\u003eResponsive Page with Multiple Modules\u003c\/title\u003e\n\u003cstyle\u003e\n        \n        .desktop-img {\n            display: block;\n        }\n        .mobile-img {\n            display: none;\n        } \n        \n        .section-title {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 5px; \n            font-family: Arial;\n        }\n        \n        .section-title2 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 3px; \n            font-family: Arial;\n        }\n       \n        .section-title3 {\n            font-size: 22px;\n            line-height: 22px;\n            font-weight: bold;\n            margin: 15px 0 10px; \n            font-family: Arial;\n        }\n\n        \n        .section-description {\n            font-size: 16px;\n            line-height: 26px;\n            margin-top: 0px;\n            margin-bottom: 5px; \n            font-family: Arial;\n        }\n      \n        .faq {\n            font-size: 16px; \n            margin: 0; \n            line-height: 26px; \n            background-color: #f2f2f2; \n            padding: 5px;\n        }\n        \n        .section-description2 {\n            font-size: 16px;\n            line-height: 26px;\n            margin: 0px; \n            font-family: Arial;\n        }\n        \n.parameters-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n\n.parameters-table {\n    width: 100%;\n    min-width: 1000px;\n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table th, .parameters-table td {\n    border-top: 1.2px solid #a6a6a6; \n    border-bottom: 1.2px solid #a6a6a6;  \n    border-left: none;  \n    border-right: none;  \n    padding: 5px 2px;\n    text-align: left;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n.options-table {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n    box-shadow: 0 6px 25px rgba(0, 0, 0, 0.1); \n}\n\n.options-table th, .options-table td {\n    border: 2px solid #000;  \n    padding: 5px 2px;  \n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.options-table th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 {\n    width: 100%;\n    min-width: 1000px; \n    border-collapse: collapse;\n    margin-top: 0px;\n}\n\n.parameters-table2 th, .parameters-table2 td {\n    border-top: 1.2px solid #a6a6a6;  \n    border-bottom: 1.2px solid #a6a6a6; \n    border-left: none;  \n    border-right: none; \n    padding: 5px 2px;\n    text-align: center;\n    font-size: 16px;\n    line-height: 16px;\n}\n\n.parameters-table2 th {\n    background-color: #f2f2f2;\n    color: #2c2c2c;\n    font-weight: bold;\n}\n\n\n.parameters-table2 .bg-gray {\n    background-color: #f2f2f2;  \n}\n\n\n.options-table-wrapper2 {\n    overflow-x: auto; \n    -webkit-overflow-scrolling: touch; \n    margin-top: 0px;\n}\n\n        .instruction-container {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container {\n              width: 38%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container {\n               width: 58%; \n             font-size: 16px;\n             font-family: Arial;\n             \n         }\n\n         .instruction-container2 {\n             display: flex;\n             justify-content: space-between;\n             align-items: flex-start;\n             gap: 10px; \/* Adds space between the video and the text *\/\n             margin-bottom: 0px; \/* Adds some space below the section *\/\n        }\n\n      \n        .img-container2 {\n             width: 50%; \n             display: flex;\n             justify-content: center; \n        }\n\n      \n        .text-container2 {\n             width: 50%; \n            display: flex;\n             justify-content: center;\n         }\n\n\n@media (max-width: 768px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n\n   \n    .options-table th, .options-table td {\n        font-size: 14px; \n        padding: 8px 4px;\n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 14px; \n        padding: 8px 4px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none;\n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container, .text-container {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n                align-items: center;\n            }\n\n            .img-container2, .text-container2 {\n                width: 100%; \/* Both take full width *\/\n                margin-bottom: 0px; \n            }\n    \n}\n\n@media (max-width: 480px) {\n    .parameters-table th, .parameters-table td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n\n    \n    .options-table th, .options-table td {\n        font-size: 12px; \n    }\n\n    .parameters-table-wrapper {\n        overflow-x: auto;\n    }\n    .parameters-table2 th, .parameters-table2 td {\n        font-size: 12px; \n        padding: 6px 3px; \n    }\n    .parameters-table-wrapper2 {\n        overflow-x: auto;\n    }\n    .desktop-img {\n                display: none; \n            }\n            .mobile-img {\n                display: block; \n            }\n    .instruction-container {\n                flex-direction: column; \n            }\n            .instruction-container2 {\n                flex-direction: column; \n            }\n    \n}\n    \u003c\/style\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-background-p.jpg\"\u003e\n\u003c!-- Introduction --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eIntroduction\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            A solenoid valve is a key component in fluid control systems, used in applications like irrigation, combustion engines, and pneumatic systems. It uses an electrical signal to activate a solenoid coil, generating a magnetic field that moves a plunger to open or close the valve. This allows for quick and precise control of fluid or gas flow, making solenoid valves essential for efficient system operation.\u003cbr\u003eOur latest U.S. Solid semi-direct solenoid valve series has been redesigned for better efficiency, featuring a more compact design and enhanced mechanical durability. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.\u003cbr\u003eAlso available with stainless steel body: Item #\u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-electric-solenoid-valve-3-4-110v-ac-solenoid-valve-stainless-steel-body-normally-closed-viton-seal-html\" target=\"_blank\"\u003eUSS2-00010\u003c\/a\u003e\u003cbr\u003e1-Pack Version: \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-electric-solenoid-valve-3-4-110v-ac-solenoid-valve-brass-body-normally-closed-viton-seal-html?_pos=1\u0026amp;_sid=7818e98f6\u0026amp;_ss=r\" target=\"_blank\"\u003eUSS2-00007\u003c\/a\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Applications--\u003e\n\u003ch2 class=\"section-title2\"\u003eApplications\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-a-p.jpg\"\u003e\n\u003c!-- Features --\u003e\n\u003cdiv\u003e\n\u003ch2 class=\"section-title\"\u003eFeatures\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eThis product contains \u003cstrong\u003e20\u003c\/strong\u003e pieces of \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-electric-solenoid-valve-3-4-110v-ac-solenoid-valve-brass-body-normally-closed-viton-seal-html?_pos=1\u0026amp;_sid=7818e98f6\u0026amp;_ss=r\" target=\"_blank\"\u003eUSS2-00007\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNormally Closed: Closed when unpowered, opens when energized.\u003c\/li\u003e\n\u003cli\u003eNPT \/ G Threading (3\/4\"): NPT (National Pipe Taper) and G (BSPP) threading to accommodate diverse global specifications, ensuring a secure seal with \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eteflon tape\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eValve Body Material: Constructed from robust brass. Not suitable for drinking water applications.\u003c\/li\u003e\n\u003cli\u003eRapid Response Time: Opens\/closes in under a second, with a lifespan of over a million cycles when maintained properly.\u003c\/li\u003e\n\u003cli\u003eLow-pressure Starting: Designed for low-pressure starting, this valve can operate with minimal pressure, less than 0.1 bar, ensuring versatility in low-pressure conditions.\u003c\/li\u003e\n\u003cli\u003eViton Seal: Featuring a durable Viton seal, this valve can withstand high temperatures and resist corrosive chemicals and fluids like gasoline, oils, diesel and lubricants.\u003c\/li\u003e\n\u003cli\u003eSemi-Direct: The new series has been redesigned for improved efficiency, featuring a more compact design and enhanced mechanical durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-110VAC-2-p.jpg\"\u003e\n\u003c!-- User Manual --\u003e\n\u003ch2 class=\"section-title\"\u003eUser Manual\u003c\/h2\u003e\n\u003cp class=\"section-description\"\u003e\n            To learn how to use this product, please refer to the \u003ca href=\"http:\/\/file.ussolid.com\/content\/JFSV\/Manual-%20U.S.%20Solid%20Solenoid%20Valves.pdf\" target=\"_blank\"\u003euser manual\u003c\/a\u003e.\n    \u003c\/p\u003e\n\u003c!-- Technical Data --\u003e\n\u003ch2 class=\"section-title3\"\u003eTechnical Data\u003c\/h2\u003e\n\u003cdiv class=\"parameters-table-wrapper\"\u003e\n\u003ctable class=\"parameters-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eUSS2-00301\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePort Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e3\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eThread Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNPT \/ G\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eSemi-direct\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eWiring Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eLead Wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperation Mode\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eNormally Closed\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow Aperture\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eFlow value\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e7.6 Cv\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGasket\/Diaphragm\/Seal\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eViton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e≤1s\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eRated Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAC 110V \/ 220V , ± 10%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eIP Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eIP65\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e21 VA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e14℉-248℉(-10℃-120℃)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Liquid Viscosity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e20 cst Below\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eOperating Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir\/Water\/Diesel fuel\/Kerosene: 0-7 Bar (0-101 PSI); Oil: 0-5 Bar(0-72 PSI)\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eSuitable Media\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003eAir, water, oil, natural gas, diesel fuel, kerosene etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003eGross Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e33.07 lbs\u003c\/td\u003e\n\u003ctd class=\"bg-gray\"\u003e\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e13.39\"x10.63\"x7.87\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp class=\"section-description\"\u003e*To view the full table on mobile, please swipe left or right on the screen.\u003c\/p\u003e\n\u003c!-- Operating principle --\u003e\n\n\u003ch2 class=\"section-title3\"\u003eCE Certified Quality \u0026amp; Safety\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/CE\/CE.jpg\"\u003e\n\u003ch2 class=\"section-title\"\u003eOperating Principle\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container2\"\u003e\n\u003cdiv class=\"img-container2\"\u003e\n\u003c!-- GIF --\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Direct.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container2\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/Pilot.gif\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-acting solenoid valves\u003c\/strong\u003e operate by using electromagnetic force to directly lift the plunger when energized, allowing flow, with a spring returning it to closed position when de-energized. They feature simple construction and fast response, but are limited to low-pressure and small-flow applications, including vacuum systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePilot-operated solenoid valves\u003c\/strong\u003e work by first opening a small pilot valve when energized, which then uses system pressure to operate the main valve. When de-energized, the pilot closes and the main valve resets. This design enables efficient control of high-pressure and large-flow systems with minimal power consumption, though it requires minimum operating pressure to function properly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- FAQ --\u003e\n\u003ch2 class=\"section-title\"\u003eFAQ\u003c\/h2\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2.jpg\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-brass-2-p.jpg\"\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 1: Which sealing material, VITON or NBR, is more suitable for use with gasoline, kerosene, or other petroleum products?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eVITON.\u003c\/strong\u003e It is the better choice due to its excellent resistance to high temperatures, chemicals, and fuels. For long-term or demanding applications, VITON outperforms NBR.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 2: Can these solenoid valves be used continuously for extended periods?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThese valves should be energized for \u003cstrong\u003eless than 8 hours\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 3: How long should you wait between two consecutive five-hour uses of our solenoid valve?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eIt is recommended to allow \u003cstrong\u003eabout 20 minutes\u003c\/strong\u003e of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 4: How long does a solenoid valve last?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWith a lifespan of over a million cycles when maintained properly, the actual longevity may vary depending on factors such as operating conditions, fluid type, pressure, temperature, and maintenance practices.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 5: Can this be used for Drinking Water?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003e\u003cstrong\u003eNO.\u003c\/strong\u003e This solenoid valve is made of brass, which contains lead, should not be used for drinking water.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 6: Can it be used outdoors?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eWhile the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 7: What does the arrow on the valve body indicate?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eThe arrow on the valve indicates the flow direction. Most U.S. Solid valves are unidirectional, meaning they are designed to operate correctly only when fluid flows in the direction of the arrow. If installed in the opposite direction, the valve may not function properly (e.g., a Normally Closed valve may fail to close).\u003c\/p\u003e\n\u003cp class=\"faq\"\u003e\u003cb\u003eProblem 8: What is the difference between N.C. (Normally Closed) and N.O. (Normally Open)?\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Closed (NC):\u003c\/strong\u003e Valve remains closed when power is off, opening only when energized. Ideal for fail-safe closed applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNormally Open (NO):\u003c\/strong\u003e Valve remains open when power is off, closing only when energized. Ideal for fail-safe open applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- WIRING --\u003e\n\u003ch2 class=\"section-title\"\u003eWIRING\u003c\/h2\u003e\n\u003cdiv class=\"instruction-container\"\u003e\n\u003cdiv class=\"img-container\"\u003e\n\u003cimg alt=\"\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/JFSV-POLARITY.jpg\" style=\"width: 100%; height: auto;\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"text-container\"\u003e\n\u003cp class=\"section-title\"\u003e\u003cstrong\u003ePolarity\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"section-description\"\u003eFor valves with 2 wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -). Some units, like those pictured to the left, include a ground wire. Open up the connector and look for the ground symbol, shown in the corner of Figure. For valves with a ground wire, please be sure to ground the valve. For the other two wires, the valve will actuate regardless of which terminal each wire is connected to (+ or -).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Precautions --\u003e\n\u003ch2 class=\"section-title2\"\u003ePrecautions\u003c\/h2\u003e\n\u003cul class=\"section-description2\"\u003e\n\u003cli\u003eIt is recommended to filter the fluid before use to prevent impurities from blocking the valve, which could lead to incomplete closure.\n                    \u003c\/li\u003e\n\u003cli\u003eFlow Direction: During installation, ensure the arrow on the valve body aligns with the medium's flow direction. If reverse pressure is possible, install a check valve to prevent backflow.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure optimal performance and extend the solenoid valve's lifespan, install it horizontally with the coil facing vertically upward. Avoid vertical or backward coil orientation.\n                    \u003c\/li\u003e\n\u003cli\u003eThe solenoid valve generates heat during operation. Avoid direct contact with your hands.\n                    \u003c\/li\u003e\n\u003cli\u003eSolenoid valves that have been out of service for an extended period should be cleaned to remove any accumulated impurities or condensation before use.\n                    \u003c\/li\u003e\n\u003cli\u003eTo ensure a secure seal, always use \u003ca href=\"https:\/\/ussolid.com\/products\/u-s-solid-10-rolls-0-7-inch-w-x-905-inches-l-teflon-tape-plumbers-tape-yellow-shell-html?_pos=3\u0026amp;_sid=7aa2e2725\u0026amp;_ss=r\" target=\"_blank\"\u003eTeflon tape\u003c\/a\u003e when connecting NPT \/ G threads.\n                    \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- background --\u003e\n\u003cimg alt=\"Desktop Image 1\" class=\"desktop-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use.png\"\u003e\n\u003cimg alt=\"Desktop Image 2\" class=\"mobile-img\" src=\"http:\/\/file.ussolid.com\/content\/Detailed%20Page\/JFSV\/jfsv-seal%20material-use-p.png\"\u003e\n\u003cp class=\"section-description\"\u003e*\u003cstrong\u003eImportant:\u003c\/strong\u003e Check marks (√) denote conditional suitability only; crosses (×) indicate complete incompatibility.\u003c\/p\u003e\n\u003c\/body\u003e","brand":"U.S. Solid","offers":[{"title":"110V AC \/ NPT","offer_id":48007521894655,"sku":"JFSV00301","price":489.99,"currency_code":"USD","in_stock":true},{"title":"220V AC \/ G","offer_id":48007521927423,"sku":"JFSV00301-G","price":489.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0723\/8113\/7151\/files\/07-301-20PCS__70583.1688607556.1280.1280.jpg?v=1762302669"}],"url":"https:\/\/ussolid.com\/collections\/semi-direct-acting-solenoid-valves-html.oembed?page=11","provider":"U.S. Solid","version":"1.0","type":"link"}