Pneumatic types of valves can be found in a wide array of industries. Food and beverage manufacturers use them to make, dispense or preserve food and beverage products. Manufacturing machines use pneumatic valve because they are ideal for automation.
The U.S. Solid 1/8" 3 way 2 Position Pneumatic Electric Solenoid Valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems. This valve allows pneumatic control of position, flow, pressure and temperature.
This valve is a 3/2 valve which means the valve has three port connections and two flow positions. One valve seal always remains open and the other closed in the de-energized mode. When the coil is energized, the mode reverses. Either the compressed air flows from port 1 to port 2 through the valve, or 1 is blocked while port 2 is exhausted via port 3. This valve is made with an aluminum alloy and has an aperture of 1/8”.
U.S. Solid pneumatic valves offer reliability, low power consuming, and have a long life. They are have prewired connections that makes installation, maintenance, and control simple.
U.S. Solid Model: USS- PSV00033
Valve Type: 2 Position 3 Way
Thread Type: NPT
Operation/ Property ： Normally Closed
Material ： Aluminum Alloy
Size ： 1/8"
Voltage ： DC 12 V
Applicable Media ： Filtered Air
Power Rating (W) ： 4
Aperture (mm) ： 1.2
Flow Value (Cv) ： 0.23
Insulation & Protection ： Class F; IP 65
Working Pressure ： 0.0 ~ 0.8 Mpa
Max. Pressure Resistance ： 1.2 Mpa
Direct Operated/ Pilot Operated ： Direct Acting
Operation Temperature ： -5°C - 60°C
Voltage ： ±10%