When it comes to inductive heating, the USS-HFIH00001 High-Frequency Induction Heater is among the best. It adopts the latest MOSFET and IGBT power units and the latest frequency control methods and techniques, and provides high efficiency, low energy consumption and very high output power. Through this, it achieves efficient and quick heating of any targeted area, and is highly useful when heating metals.
It has a 100% load design, which means that it can work 24 hours without stopping. Should there be a problem, there is an infrared temperature detector which alarms the operator if the machine overheats, and it also allows easier temperature control and simplifies manual operation.
|Input Voltage||Single Phase; 220 V or 110V|
|Max. Output Power||15 KW|
|Max. Heating Temperature||1200°C|
|Fluctuating Frequency||30 - 80 KHz|
|Fluctuating Heating Current||200 - 600 A|
|Thermal Insulation Current||200 - 600 A|
|Cooling Timing||1 - 99 s(Auto)|
|Termal Insulation Timing||1 - 99 s(Auto)|
|Heating Timing||1 - 99 s(Auto)|
|Flow Rate of Cooling Water||7.5 L/Min, 0.06 - 0.12 Mpa|
|Lift of Cooling Water||≥ 30 m|
|Water Temp. Protection Point||40°C|
|Net Weight||25 kg|
|Dimension||550 x 220 x 470 mm|
1. A heating coil with diameter 30 mm and a 1.5 m M6 copper tube will be included for free. If you would like to order more heating coils or other dimensions, please contact us by emailing email@example.com with your order number and the details of coil you need.
2. This machine cannot be used with a plug. A wire will be necessary to connect the machine to power source directly (the cross-sectional area of power line must be larger than 6 square milimeters.)
1. Works with gold, silver, aluminum, etc, weighing between 0.5 to 2 kg;
2. Size of crucible that can be used is between 60*80 mm and 100*125 mm (Generally 75 * 90 mm ).
1 x Induction Heater
1 x Standard heating coil (30 mm diameter, 3 turns)
1 x Foot Pedal
1 x English Manual
1 x 1.5 m M6 Copper Tube (Gift)