Introduction
The BT/S series is a variable-speed peristaltic pump available in three models: BT100S, BT300S, and BT600S. It features a stainless steel housing, an LCD display, and button control. In addition to the basic variable-speed functions such as speed adjustment, start/stop, direction change, and full speed, it also supports a dispensing mode (with adjustable speed, run time, interval time, and cycle count) and reverse angle setting. It supports multiple control modes, including RS485 communication control and external signal input control.
Applications
Features
- Quick-Install Pump Head: Enables easier and faster hose replacement.
- Core Parameters (BT300S): Flow range 0.005-1495 mL/min, speed range 0.1-350 rpm, speed accuracy ≤±0.2%.
- Humanized Design: Stainless steel housing, an LCD display (non-touch, display only), and button control.
- Dispensing Mode: Adjustable speed, run time, interval time, and cycle count.
- Reverse Angle: Equipped with basic suck-back function.
- Wide Voltage Design: Adapts to complex power supply environments. Circuit board with three-proof paint coating for dustproof and moisture-proof performance, ensuring high stability.
- Multiple Control Compatibility: Supports RS485 communication (Modbus protocol), external control signal input (0-5V/0-10V/4-20mA), etc.
User Manual
To learn how to use this product, please refer to the BT-S Peristaltic Pump User Manual and YZ15T Pump Head User Manual respectively.
Packing List
| ① | 1 × Complete Unit – BT300S + YZ15T | ② | 1 × User Manual for Pump BT-S | ||
| ③ | 1 × User Manual for Pump Head YZ15T | ④ | 13#,16#,17# - 1 pc each × 2m | ||
| ⑤ | 1 x Power Cable | ||||
*To view the full table on mobile, please swipe left or right on the screen.
Technical Data
| Type | Speed-Variable Type(BT300S) | Dispensing Mode | Yes |
| Pump Head Model | YZ15T(1 channel) | Suitable Tubing | 13#,14#,19#,16#,25#,17#,18# |
| Display | LCD (display only) | Control | Button |
| Flow Rate Range | 0.005-1495 mL/min | Cycle Count | 0-999 Cycles; 0=Infinite Cycle |
| Speed Range | 0.1-350rpm, adjustable | Power Supply | AC100V-240V |
| Run Time | Configurable in Seconds/Minutes/Hours/Days | Interval Time | Configurable in Seconds/Minutes/Hours/Days |
| Speed Resolution | 0.1rpm (≤100rpm), 1rpm (100-350rpm) | Power Consumption | ≤50W |
| Housing Material | Stainless Steel | IP Rate | IP31 |
| Communication | RS485 (Modbus RTU protocol) | Condition Temperature | 0-40℃ |
| External Control Signal | 0-5V, 4-20mA, 0-10V(optional) | Drive Gross Weight | 9.48 lb |
*To view the full table on mobile, please swipe left or right on the screen.
CE Certified Quality & Safety
FAQ
1.What type of peristaltic pump is this?
The BT/S series is a variable-speed peristaltic pump with stainless steel housing. It includes the basic variable-speed functions such as speed adjustment, start/stop, direction change, and full speed. It also supports a dispensing mode with adjustable speed, run time, interval time, and cycle count.
2.Does it have a timing function?
Yes. The BT/S series supports a dispensing mode with adjustable run time, interval time, and cycle count, which allows timed dispensing.
3.Does it support external control?
Yes. Please note that the buttons will no longer work after switching to external control mode. In this mode, only start/stop, direction reversal, and speed adjustment can be controlled externally; the timing function is not supported in external control mode. For any questions regarding external control and communication control, please refer to the product manual or contact our customer service directly.
4.Which types of tubing are compatible with this peristaltic pump? Are they included in the package?
The compatible tubing models include 13#, 14#, 19#, 16#, 25#, 17#, and 18#. When you purchase this product, one piece of each 13#, 16#, and 17# tubing (2 meters per piece) will be included. Below is the information for common-sized tubing:
5.Does it have a anti-drip setting?
Yes, this peristaltic pump is equipped with a basic anti-drip (suck-back) function. When the pump stops working, the motor will rotate in the reverse direction by a certain angle to suck back the liquid in the tubing and prevent dripping.
6.Does it support flow calibration?
No.