Introduction
The WT600S is a speed-variable peristaltic pump with a stainless steel housing, LCD display, and button control. It supports speed adjustment, start/stop, forward/reverse rotation, full-speed operation, timed dispensing, reverse-angle setting, external signal control, and RS485 communication.
Applications
Features
- Easy-to-Install KZ25 Pump Head: The pressure block and tube clamp design make tube installation and replacement convenient.
- Core Parameters: Flow rate range 93–6000 mL/min, speed range 30–600 rpm, and speed accuracy less than ±0.5%.
- KZ25 Tube Compatibility: Supports 15#, 24#, 35#, and 36# tubing with a 2.4 mm wall thickness.
- Humanized Design: Stainless steel housing, 132×32 dot-matrix LCD display, and button control.
- Dispensing Mode: Adjustable speed, run time, interval time, and cycle count.
- Reverse Angle: Supports suck-back operation to help reduce dripping after the pump stops.
- Multiple Control Methods: Supports internal control, external analog control, pulse/level control, RS485 communication, and MODBUS protocol.
- Wide-Voltage and Durable Design: Supports a wide-voltage power supply. The conformal-coated circuit board helps improve dust and moisture resistance, while the stainless steel housing is easy to clean.
User Manual
For operation and installation instructions, please refer to the WT-S V3 Series Peristaltic Pump Operation Manual and the KZ25 Pump Head Operation Manual.
Packing List
| ① | 1 × Complete Unit – WT600S + KZ25 | ② | 1 × WT-S V3 Series Peristaltic Pump Operation Manual | ||
| ③ | 1 × KZ25 Pump Head Operation Manual | ④ | 15# and 36# tubing – 1 piece each × 2 m | ||
| ⑤ | 1 × Power Cable | ||||
*Please confirm the actual included tubing before publishing the packing list.
Technical Data
| Type | Speed-Variable Type (WT600S) | Number of Channels | 1 |
| Pump Head Model | KZ25 (1 channel) | Suitable Tubing | 15#, 24#, 35#, 36# |
| Display | 132×32 LCD (display only) | Control | Button |
| Flow Rate Range | 93–6000 mL/min | Cycle Count | 0–999 cycles; 0 = infinite cycle |
| Speed Range | 30–600 rpm, adjustable | Power Supply | AC100–240V, 50/60Hz; confirm the nameplate version |
| Run Time | 0.1–999 seconds/minutes/hours/days | Interval Time | 0.1–999 seconds/minutes/hours/days |
| Speed Resolution | 0.1 rpm | Speed Accuracy | Less than ±0.5% |
| Housing Material | Stainless Steel | IP Rate | IP31 |
| Communication | RS485, MODBUS RTU protocol; Wi-Fi remote control if equipped | Working Temperature | 0–40°C |
| Relative Humidity | <80% | Power Consumption | <150W |
| External Control Signal | 0–5V, 0–10V, or 4–20mA | Drive Weight | 5.9 kg / approximately 13.0 lb |
| Drive Dimensions | 318 × 185 × 230 mm | Pump Head Weight | 0.72 kg |
*Flow rate is based on the WT600S with the KZ25 pump head and suitable tubing. Actual flow may vary with tubing, liquid viscosity, pressure, temperature, and tube wear.
CE Certified Quality & Safety
FAQ
1. What type of peristaltic pump is this?
The WT600S is a speed-variable peristaltic pump with stainless steel housing, LCD display, and button control. It supports speed adjustment, start/stop, forward/reverse rotation, full-speed operation, timed dispensing, reverse-angle setting, external signal control, and RS485 communication.
2. Does it have a timing function?
Yes. The WT600S supports a dispensing mode with adjustable run time, interval time, and cycle count for timed dispensing.
3. Does it support external control?
Yes. The WT600S supports external analog speed control using 0–5V, 0–10V, or 4–20mA signals, as well as external start/stop and direction control. When external control mode is selected, the front-panel keys are disabled and the timing function is not available in that mode. Please refer to the product manual for wiring and signal requirements.
4. Which types of tubing are compatible with this pump?
The KZ25 pump head is compatible with 15#, 24#, 35#, and 36# tubing with a 2.4 mm wall thickness. Please select tubing according to the liquid, pressure, temperature, and required flow rate. Confirm the included tubing in the package before purchase.
5. Does it have an anti-drip setting?
Yes. The reverse-angle function rotates the pump briefly in the opposite direction after stopping to suck back liquid in the tubing and help reduce dripping.
6. Does it support flow calibration?
It does not have a built-in automatic flow calibration function. Actual flow may vary with tubing, liquid viscosity, pressure, temperature, and tube wear. Manual flow verification or speed adjustment may be required.