Electric Strapping Machine - Handheld Semi-Automatic Banding Tool for 1/2-5/8 in PP PET Straps, with 2×3000mah Battery

Introduction

The U.S. Solid Electric Strapping Machine uses the principle of friction heat fusion to weld two straps together. Designed for high-efficiency and secure packaging, this machine is ideal for industries such as logistics, manufacturing, and e-commerce. With its powerful performance and user-friendly operation, it meets the growing market demand for improved packaging efficiency and reliability in both small and large-scale operations.
Easily cope with various packaging scenarios. For example paper industry, aluminum industry, steel industry, wood, wooden box packaging, chemical fiber, cotton spinning, chemical industry, metal products, and other industries.

Features

• Semi-Automatic:Tightening the strapping is done manually, while welding and cutting are automated, offering users the convenience of automation with a more cost-effective solution.
• 2 x 3000mAh Batteries:Two rechargeable lithium batteries, capable of completing 300 strappings per charge. Each charges for only 90 minutes.
• For PP & PET Strapping:Compatible with 1/2-5/8 in wide, 0.4 to 1.2 mm thick PET (Polyester) and PP (Polypropylene) strapping by replacing the spring and accessories.
• No Need For Buckles:Friction heat fusion welds the straps with 75% of their maximum load-bearing strength, ensuring they won’t break easily, eliminating the need for extra buckles.
• Adjustable:Welding time is adjusted by turning the screw, while tightening force is adjusted by feel.
• Packing List:In addition to the main machine, two batteries, the battery charger and the user manual, an additional tool kit will be provided.

Precautions

1.Ensure the strap matches the spring installed in the machine

This electric strapping machine comes with a default spring for fusing PET straps (recommended U.S. SOLID PET strapping). For PP straps, please replace the spring with the one provided. For installation guidance, refer to the video or contact customer service.

2.Optimal welding time

Adjust welding time using the buttons to find the optimal setting before first use. Many factors, such as temperature and strap thickness, can affect the welding time.

3.Clean strap residue on the cutting gear

Avoid damaging the machine and yourself.

4.Strapping jams (LED in red)

If straps get jammed, switch off the power, cut the straps, remove the screws on the left and right panel covers, and clear the straps. Then, check for issues like dislodged lines on the travel switch and replace the micro switch if necessary.

5.Motor not rotating

Press the welding and tensioning buttons to check the motor and micro switch. Replace them if needed.