INTRODUCTION
The U.S. Solid welding water cooler was designed having in mind a smooth operation that ensures perfect results each time, combining optimal cooling strength with a safe and user-friendly design. An excellent choice for all kinds of operations including cooling systems for AC and DC argon arc welding equipment, cutting machines, DC argon arc welding equipment, CO2 welding machine, resistance welding devices, plasma welding machine, and spot welding machines.
FEATURES
APPLICATIONS
ESPECIFICAÇÕES
| Modelo | USS-ZWC00003 | Marca | U.S. Solid |
|---|---|---|---|
| Tensão | 110 V | Poder | 370 W |
| Atual | ≤2,2 A | Fluxo | 7,5 L/min |
| Pressão máxima | 0,35 MPa | Temperatura de trabalho | -68°F a 140°F |
| Capacidade do tanque de água | 12 litros (3,2 galões) | Capacidade de resfriamento | 1,7 kW |
PERGUNTAS FREQUENTES
1. O motor não liga. What should be done?
If the main voltage is too low, use the correct power supply.If the start capacitor is defective, replace it.
If the motor is defective, contact for professional assistance.
If the machine hasn't been used for a long time, blow dry compressed air into the water inlet or outlet for 20 seconds.
2.The motor works well (air is blowing out of the radiator), but there is little or no water drainage. Como isso deve ser resolvido?
Sopre ar comprimido seco na entrada ou saída de água por 20 segundos.
3. Por que o ventilador não funciona?
Pode haver obstrução por sujeira dentro da bomba. Unplug the machine safely, remove the protective cover, and clean the fan.
WARNING
1.For safety and optimal product performance, only use original equipment manufacturer (OEM) parts.
2.Do not touch any electrical connections while the machine is plugged in or turned on to avoid the risk of electrocution.
3.The machine is not waterproof. Do not use the machine in the rain or immerse it in water.
4.Periodically clean the radiator with dry compressed air to eliminate blockages that can reduce product performance.
5.After not using the cooler for an extended period, restart the motor and check that water is being pumped out to prevent damage to the water - cooling torch.
PACKING LIST
- Water cooler x1
- Stainless Steel Hose Clamps x4
- Joint x2
- Instruction manual x1
- Red Hose(1.5m(~5 ft)long,10.5 cm (4.13 in)diameter) x1
- Blue Hose(1.5m(~5 ft)long 10.5 cm (4.13 in)diameter) x1
Download user manual here
INTRODUCTION
The U.S. Solid welding water cooler was designed having in mind a smooth operation that ensures perfect results each time, combining optimal cooling strength with a safe and user-friendly design. An excellent choice for all kinds of operations including cooling systems for AC and DC argon arc welding equipment, cutting machines, DC argon arc welding equipment, CO2 welding machine, resistance welding devices, plasma welding machine, and spot welding machines.
FEATURES
APPLICATIONS
ESPECIFICAÇÕES
| Modelo | USS-ZWC00003 | Marca | U.S. Solid |
|---|---|---|---|
| Tensão | 110 V | Poder | 370 W |
| Atual | ≤2,2 A | Fluxo | 7,5 L/min |
| Pressão máxima | 0,35 MPa | Temperatura de trabalho | -68°F a 140°F |
| Capacidade do tanque de água | 12 litros (3,2 galões) | Capacidade de resfriamento | 1,7 kW |
PERGUNTAS FREQUENTES
1. O motor não liga. What should be done?
If the main voltage is too low, use the correct power supply.If the start capacitor is defective, replace it.
If the motor is defective, contact for professional assistance.
If the machine hasn't been used for a long time, blow dry compressed air into the water inlet or outlet for 20 seconds.
2.The motor works well (air is blowing out of the radiator), but there is little or no water drainage. Como isso deve ser resolvido?
Sopre ar comprimido seco na entrada ou saída de água por 20 segundos.
3. Por que o ventilador não funciona?
Pode haver obstrução por sujeira dentro da bomba. Unplug the machine safely, remove the protective cover, and clean the fan.
WARNING
1.For safety and optimal product performance, only use original equipment manufacturer (OEM) parts.
2.Do not touch any electrical connections while the machine is plugged in or turned on to avoid the risk of electrocution.
3.The machine is not waterproof. Do not use the machine in the rain or immerse it in water.
4.Periodically clean the radiator with dry compressed air to eliminate blockages that can reduce product performance.
5.After not using the cooler for an extended period, restart the motor and check that water is being pumped out to prevent damage to the water - cooling torch.
PACKING LIST
- Water cooler x1
- Abraçadeiras de aço inoxidável x4
- Junta x2
- Manual de instruções x1
- Mangueira vermelha (1,5 m de comprimento, 10,5 cm de diâmetro) x1
- Mangueira azul (1,5 m de comprimento, 10,5 cm de diâmetro) x1
Baixar manual do usuário