U.S. Solid 1/8" 3 Way 2 Position Pneumatic Electric Solenoid Valve DC 12 V

Product Description

The U.S. Solid 1/8" 3 way 2 Position Pneumatic Electric Solenoid Valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device. It is also the interface between electronic controllers and pneumatic systems. This valve allows pneumatic control of position, flow, pressure and temperature.
This valve is a 3/2 valve which means the valve has three port connections and two flow positions. One valve seal always remains open and the other closed in the de-energized mode. When the coil is energized, the mode reverses. Either the compressed air flows from port 1 to port 2 through the valve, or 1 is blocked while port 2 is exhausted via port 3. This valve is made with an aluminum alloy and has an aperture of 1/8”.
U.S. Solid pneumatic valves offer reliability, low power consuming, and have a long life. They are have prewired connections that makes installation, maintenance, and control simple.

Specifications
U.S. Solid Model: USS- PSV00033
Valve Type: 2 Position 3 Way
Thread Type: NPT 
Operation/ Property ： Normally Closed
Material ： Aluminum Alloy
Size ： 1/8"
Voltage ： DC 12 V
Applicable Media ： Filtered Air
Power Rating (W) ： 4
Aperture (mm) ： 1.2
Flow Value (Cv) ： 0.23
Insulation & Protection ： Class F; IP 65
Working Pressure ： 0.0 ~ 0.8 Mpa
Max. Pressure Resistance ： 1.2 Mpa
Direct Operated/ Pilot Operated ： Direct Acting
Operation Temperature ： -5°C - 60°C
Voltage ： ±10%