U.S. Solid Electric Strapping Machine - Electric Automatic Banding Machine with LCD Screen for 1/2-5/8 in PP PET Straps

Introduction

The U.S. Solid Electric Strapping Machine uses the principle of friction heat fusion to weld two straps together. Designed for high-efficiency and secure packaging, this machine is ideal for industries such as logistics, manufacturing, and e-commerce. With its powerful performance and user-friendly operation, it meets the growing market demand for improved packaging efficiency and reliability in both small and large-scale operations.
Easily cope with various packaging scenarios. For example paper industry, aluminum industry, steel industry, wood, wooden box packaging, chemical fiber, cotton spinning, chemical industry, metal products, and other industries.

Features

• Fully Automatic:Save time and labor with a machine that combines tensioning, cutting, and banding—no need for buckles or seals, improving efficiency.
• 2 x 4000mAh Batteries:Two rechargeable lithium batteries, capable of completing 250-350 strappings per charge. Each can be recharged 2000 times, only charge for 90 minutes, then it can work outdoors for 5 hours.
• LCD Screen:Our machine equips with an LCD screen, instead of adjusting the welding time and tightening force through knobs blindly. You could accurately adjust the parameter according to the packing situation, bring your packaging process to the perfect state.
• For PP & PET Strapping:Compatible with 1/2-5/8 in(13-16mm) wide, 0.4 to 1.2 mm thick PET (Polyester) and PP (Polypropylene) strapping by replacing the spring and accessories.
• No Need For Buckles:Friction heat fusion welds the straps with 75% of their maximum load-bearing strength, ensuring they won’t break easily, eliminating the need for extra buckles.
• Adjustable:Welding time and tightening force (900-3200N) can be easily adjusted via buttons, with real-time digital display on the LCD screen.
• Packing List:In addition to the main machine, two batteries, the battery charger and the user manual, an additional tool kit will be provided.

Precautions

1.Ensure the strap matches the spring installed in the machine

This electric strapping machine comes with a default spring for fusing PET straps (recommended U.S. SOLID PET strapping). For PP straps, please replace the spring with the one provided. For installation guidance, refer to the video or contact customer service.

2.Optimal welding time

Adjust welding time using the buttons to find the optimal setting before first use. Many factors, such as temperature and strap thickness, can affect the welding time.

3.Clean strap residue on the cutting gear

Avoid damaging the machine and yourself.

4.Strapping jams (LED in red)

If straps get jammed, switch off the power, cut the straps, remove the screws on the left and right panel covers, and clear the straps. Then, check for issues like dislodged lines on the travel switch and replace the micro switch if necessary.

5.Motor not rotating

Press the welding and tensioning buttons to check the motor and micro switch. Replace them if needed.

6.Explanation of the wearing parts of the relevant baler

If the machine slips during use, it is necessary to replace the tension wheel and the magnetic plate in time. If it is found that the machine cannot cut the packing tape, it is necessary to replace the and the cutter immediately.