Pipe Size: 1/2"
Flow Aperture: 12 mm
Body Material: Brass
Gasket / Diaphragm / Seal: VITON
Operation Type: Pilot
Operation Mode: Normally Closed
Voltage: DC 12V ± 10%
Power rating: 12 W
Suitable Media: Air, water, oil, Diesel fuel, kerosene etc.
Operational pressure range: 0.1-16 Bar(0 to 232 PSI)
Flow capacity: 4.8 gallons per minute (GPM) of water at 60 oF with a pressure drop of 1 PSI
Flow value: 4.8 Cv
Temperature, Minimum: 14 degrees Fahrenheit (-10 degrees Celsius)
Temperature Maximum: 248 degrees Fahrenheit (120 degrees Celsius)
OVERHEATING WARNING: Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80℃), which is fully complied with national standard: JB/T7352-2010. If energized continuously for more than 8 hours the coil may burn.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.