null
Created with Sketch. Created with Sketch.
Toggle menu

    • Shop by Category

  • Valves
  • Balances and Scales
  • Scientific
  • Manufacturing
  • Commercial
  • Pipe Connectors
  • Home&Garden
  • Pet Supplies
  • Medical
  • Marine and Auto
  • Replacement Parts
  • Metals
  • Hardware
  • Farming
  • Computer Monitor

    • Shop by Brand

  • U.S. Solid
  • View all Brands
  • U.S. Solid Electric Solenoid Valve- 1/2" 12V DC Solenoid Valve Brass Body Normally Closed, Pilot Type, VITON SEAL
  • U.S. Solid Electric Solenoid Valve- 1/2" 12V DC Solenoid Valve Brass Body Normally Closed, Pilot Type, VITON SEAL
  • U.S. Solid Electric Solenoid Valve- 1/2" 12V DC Solenoid Valve Brass Body Normally Closed, Pilot Type, VITON SEAL
  • U.S. Solid Electric Solenoid Valve- 1/2" 12V DC Solenoid Valve Brass Body Normally Closed, Pilot Type, VITON SEAL
  • U.S. Solid Electric Solenoid Valve- 1/2" 12V DC Solenoid Valve Brass Body Normally Closed, Pilot Type, VITON SEAL

    • U.S. Solid Electric Solenoid Valve- 1/2" 12V DC Solenoid Valve Brass Body Normally Closed, Pilot Type, VITON SEAL

    $37.99
    SKU:
    JFSV00008
    UPC:
    853996003339
    Condition:
    New
    Availability:
    Usually ships within 24 hours
    Width:
    4.50 (in)
    Height:
    3.50 (in)
    Depth:
    2.40 (in)
    google product category:
    Hardware > Plumbing > Plumbing Valves
    Size:
    1/2 inches
    Voltage:
    12V DC
    Material:
    Brass

    Product Description

    U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a high-quality brass body, 1/2" female threaded (NPT) connections, and heat and oil resistant Viton gasket. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. The solenoid valves have a rating of IP65, which means they can withstand spray from water. However, if permanently installed outdoors, it is recommended that you enclose the valves in some protective housing. Not for use underwater. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, harsh chemicals, flow control for irrigation systems, reverse osmosis systems, or to control flow of propane gas.
     
    Specifications
    Pipe Size: 1/2" 
    Flow Aperture: 12 mm 
    Body Material: Brass 
    Gasket / Diaphragm / Seal: VITON 
    Operation Type: Pilot 
    Operation Mode: Normally Closed 
    Voltage: DC 12V ± 10% 
    Power rating: 12 W 
    Suitable Media: Air, water, oil, Diesel fuel, kerosene etc. 
    Operational pressure range: 0.1-16 Bar(0 to 232 PSI) 
    Flow capacity: 4.8 gallons per minute (GPM) of water at 60 oF with a pressure drop of 1 PSI 
    Flow value: 4.8 Cv 
    Temperature, Minimum: 14 degrees Fahrenheit (-10 degrees Celsius) 
    Temperature Maximum: 248 degrees Fahrenheit (120 degrees Celsius)
     
    OVERHEATING WARNING: Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80℃), which is fully complied with national standard: JB/T7352-2010. If energized continuously for more than 8 hours the coil may burn.
     
    WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. 

    Product Videos

    Custom Field

    google product category Hardware > Plumbing > Plumbing Valves
    Size 1/2 inches
    Voltage 12V DC
    Material Brass

    Product Reviews

    Recommended

    ​