Automatic Strapping Machine - Electric Auto Banding Machine with 2 x 4000mah Battery

Introduction

The Electric Strapping Machine is designed to meet a wide range of strapping needs with its unique adjustment design. It offers a manually adjustable tensile force ranging from 600N to 3200N, allowing users to adapt tension and fusion time for various materials such as paper, fabric, and building materials. Powered by two 4000mAh batteries, this portable baler provides extended battery life, with each fully charged battery capable of operating approximately 400 belts. This makes it a reliable assistant for both light and heavy-duty tasks.
Compared to manual strapping machines, this automatic strapping tool combines tensioning, cutting, and banding into one seamless process, eliminating the need for buckles or seals. This not only improves efficiency but also reduces strapping roll waste and conserves steel resources. Additionally, its portability allows it to operate anywhere, anytime, without the need for wired connections.

Features

• Automatic:Save time and labor with a machine that combines tensioning, cutting, and banding—no need for buckles or seals, improving efficiency.
• 2 x 4000mAh Batteries:Two rechargeable lithium batteries provide 400 strappings per charge, with just 90 minutes charging time.

• Compatible with 1/2-5/8 in wide, 0.4 to 1.2 mm thick PET (Polyester) and PP (Polypropylene) strapping by replacing the spring and accessories.
• No Need For Buckles:Friction heat fusion welds the straps with 75% of their maximum load-bearing strength, ensuring they won’t break easily, eliminating the need for extra buckles.
• Adjustable:Welding time and tightening force (600-3200N) can be easily adjusted via knobs, with real-time digital display on the LCD screen.
• Packing List:In addition to the main machine, two batteries, the battery charger and the user manual, an additional tool kit will be provided.

Precautions

1.Ensure the strap matches the spring installed in the machine

This electric strapping machine comes with a default spring for fusing PET straps (recommended U.S. SOLID PET strapping). For PP straps, please replace the spring with the one provided. For installation guidance, refer to the video or contact customer service.

2.Optimal welding time

Adjust welding time using the buttons to find the optimal setting before first use. Many factors, such as temperature and strap thickness, can affect the welding time.

3.Clean strap residue on the cutting gear

Avoid damaging the machine and yourself.

4.Strapping jams (LED in red)

If straps get jammed, switch off the power, cut the straps, remove the screws on the left and right panel covers, and clear the straps. Then, check for issues like dislodged lines on the travel switch and replace the micro switch if necessary.

5.Motor not rotating

Press the welding and tensioning buttons to check the motor and micro switch. Replace them if needed.