INTRODUCTION
Designed for durable flow control, this 3-way motorized ball valve has a stainless steel body, PTFE ball seal, and FKM O-ring. This 1-1/2 in model features Plug wiring and a standard bore, and is available in AC 110V or AC 220V versions with NPT or G threaded connections. It is suitable for HVAC, water treatment, and other automated fluid systems.
FEATURES
APPLICATIONS
FLOW DIRECTION (L Type)
Situation 1:
With power, water flows from the BOTTOM port to the LEFT port. Without power, water flows from the BOTTOM port to the RIGHT port.
Situation 2:
With power, water flows from the LEFT to the BOTTOM port. Without power, water flows from the RIGHT to the BOTTOM port.
SPECIFICATIONS
| Model | USS-MSV10072/USS-MSV10072-G | Wiring Type | Plug |
|---|---|---|---|
| Size | 1-1/2" | O-ring | FKM |
| Valve Material | Stainless Steel | Ball Seal | PTFE |
| Operating Time | ≤12 Seconds | Working Voltage | 110V/220V AC |
| Max Power | 21.5 W | Max Torque | 50 N·m |
| Max Medium Pressure | 1.0 MPa | Temperature Range for Flow Medium | 2°C to 90°C |
| Life Expectancy | 70,000 Cycles | Bore Type | Standard |
| Thread Type | NPT / G | Actuator Material | PPO |
| Ambient Temperature Range | -15°C to 50°C | Enclosure Rating | IP67 |
CE CERTIFIED QUALITY & SAFETY
FAQ
1. What is the Waterproof Rating of this valve?
The motor's housing is rated at IP67 for ingress protection. If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
2.What is the difference between Full Port and Standard Port?
In a full port valve, the internal diameter of the valve is the same as the pipe it's connected to. In a standard port valve, the internal diameter of the valve is smaller than the pipe size.
3.Can this be used for Drinking Water?
NO. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
4.For auto return valves, what is the minimum On-Time required for electrical storage to enable closing when power off?
To ensure automatic reset functionality when the power is disconnected, it is essential to power the device for approximately one minute to charge the capacitor in 2-wire auto return motorized ball valves.
5.Can this valve be used for propane?
The listed specifications do not confirm propane compatibility. Before use, verify the valve materials and pressure rating with the manufacturer for your specific propane system.
WARNING
1.The valves shown in this sheet are equipped with a manual operation function. You can manually open or close the valve safely, and this design allows for operation even in the absence of power, providing flexibility and reliability.
2.Only Auto Return Models will return to the closed position in the event of a power outage. All other models will remain in their current position. If this is a concern, consider purchasing an Auto-Return Model.
3.While the motorized ball valves have an IP67 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.
4.Use the valve only within the listed voltage, pressure, fluid-temperature, and ambient-temperature limits. Disconnect power before wiring or servicing.
Valve Attributes
Port Types:
Full Port: It has a wide internal passage, resulting in low water - flow resistance.
Standard Port: Meets regular usage requirements.
Ingress - Protection Rating:
The valves have an ingress - protection rating of IP67. The 6 in IP67 represents complete dust - tightness. The 7 in IP67 indicates protection against water immersion up to 1 meter for 30 minutes. They are suitable for a variety of complex environments, effectively resisting the intrusion of dust and water to ensure reliable operation.
CHEMICAL RESISTANCE CHART FOR BALL VALVE SEAL MATERIALS
Download user manual here
INTRODUCTION
Designed for durable flow control, this 3-way motorized ball valve has a stainless steel body, PTFE ball seal, and FKM O-ring. This 1-1/2 in model features Plug wiring and a standard bore, and is available in AC 110V or AC 220V versions with NPT or G threaded connections. It is suitable for HVAC, water treatment, and other automated fluid systems.
FEATURES
APPLICATIONS
FLOW DIRECTION (L Type)
Situation 1:
With power, water flows from the BOTTOM port to the LEFT port. Without power, water flows from the BOTTOM port to the RIGHT port.
Situation 2:
With power, water flows from the LEFT to the BOTTOM port. Without power, water flows from the RIGHT to the BOTTOM port.
SPECIFICATIONS
| Model | USS-MSV10072/USS-MSV10072-G | Wiring Type | Plug |
|---|---|---|---|
| Size | 1-1/2" | O-ring | FKM |
| Valve Material | Stainless Steel | Ball Seal | PTFE |
| Operating Time | ≤12 Seconds | Working Voltage | 110V/220V AC |
| Max Power | 21.5 W | Max Torque | 50 N·m |
| Max Medium Pressure | 1.0 MPa | Temperature Range for Flow Medium | 2°C to 90°C |
| Life Expectancy | 70,000 Cycles | Bore Type | Standard |
| Thread Type | NPT / G | Actuator Material | PPO |
| Ambient Temperature Range | -15°C to 50°C | Enclosure Rating | IP67 |
CE CERTIFIED QUALITY & SAFETY
FAQ
1. What is the Waterproof Rating of this valve?
The motor's housing is rated at IP67 for ingress protection. If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
2.What is the difference between Full Port and Standard Port?
In a full port valve, the internal diameter of the valve is the same as the pipe it's connected to. In a standard port valve, the internal diameter of the valve is smaller than the pipe size.
3.Can this be used for Drinking Water?
NO. This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
4.For auto return valves, what is the minimum On-Time required for electrical storage to enable closing when power off?
To ensure automatic reset functionality when the power is disconnected, it is essential to power the device for approximately one minute to charge the capacitor in 2-wire auto return motorized ball valves.
5.Can this valve be used for propane?
The listed specifications do not confirm propane compatibility. Before use, verify the valve materials and pressure rating with the manufacturer for your specific propane system.
WARNING
1.The valves shown in this sheet are equipped with a manual operation function. You can manually open or close the valve safely, and this design allows for operation even in the absence of power, providing flexibility and reliability.
2.Only Auto Return Models will return to the closed position in the event of a power outage. All other models will remain in their current position. If this is a concern, consider purchasing an Auto-Return Model.
3.While the motorized ball valves have an IP67 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.
4.Use the valve only within the listed voltage, pressure, fluid-temperature, and ambient-temperature limits. Disconnect power before wiring or servicing.
Valve Attributes
Port Types:
Full Port: It has a wide internal passage, resulting in low water - flow resistance.
Standard Port: Meets regular usage requirements.
Ingress - Protection Rating:
The valves have an ingress - protection rating of IP67. The 6 in IP67 represents complete dust - tightness. The 7 in IP67 indicates protection against water immersion up to 1 meter for 30 minutes. They are suitable for a variety of complex environments, effectively resisting the intrusion of dust and water to ensure reliable operation.
CHEMICAL RESISTANCE CHART FOR BALL VALVE SEAL MATERIALS
Download user manual here