INTRODUCTION
The U.S. Solid PA66 solenoid valve uses a pilot design for dependable flow control in irrigation and other fluid systems. This 3/4 in model is available with G or NPT threads and is normally closed. The G version operates at DC 12V, while the NPT version operates at DC 12V; power ratings are 15 W. It provides a 0.3-8 bar operating pressure range, 7.6 Cv flow value, and 20 mm mm flow aperture. NBR seals support use with Air, water, liquid, light oil across an operating temperature range of -5 ~ 80 ℃. The valve is rated IP65 and the specifications below identify the values for each thread version.
FEATURES
APPLICATIONS
|
POLARITY When dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial. |
SPECIFICATIONS
| Model | USS-YSV00323 | Size | 3/4 in |
|---|---|---|---|
| Valve Material | PA66 | Rated Voltage | DC 12V |
| Power Rating | 15 W | Flow Value | 7.6 Cv |
| Valve State | Normally Closed | Seal Material | NBR |
| Operating Temperature | -5 ~ 80 ℃ | Operating Pressure | 0.3-8 bar |
| Working Principle | Pilot | Suitable Media | Air, water, liquid, light oil |
| Outdoor Use | Yes | Flow Aperture | 20 mm |
| IP Grade | IP65 | Wiring Type | Junction Box |
Valve Attributes
Ingress - Protection Rating:
The valves have an ingress - protection rating of IP65. The first digit 6 indicates complete dust - tightness. The second digit 5 means protection against water jets from any direction. They are suitable for a variety of complex environments, effectively resisting the intrusion of dust and water to ensure reliable operation.
FAQ
1. What is the Waterproof Rating of this valve?
The motor's housing is rated at IP65 for ingress protection. If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
2. Can these solenoid valves be used continuously for extended periods?
These valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.
3.How long should you wait between two consecutive five-hour uses of our solenoid valve?
It is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.
4.Can it be used outdoors?
While the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.
Download user manual here.
INTRODUCTION
The U.S. Solid PA66 solenoid valve uses a pilot design for dependable flow control in irrigation and other fluid systems. This 3/4 in model is available with G or NPT threads and is normally closed. The G version operates at DC 12V, while the NPT version operates at DC 12V; power ratings are 15 W. It provides a 0.3-8 bar operating pressure range, 7.6 Cv flow value, and 20 mm mm flow aperture. NBR seals support use with Air, water, liquid, light oil across an operating temperature range of -5 ~ 80 ℃. The valve is rated IP65 and the specifications below identify the values for each thread version.
FEATURES
APPLICATIONS
POLARITY
When dealing with valves equipped with two wires, an important characteristic to note is their polarity - insensitive design. This means that the valve will actuate correctly regardless of which terminal each wire is connected to. Whether a wire is attached to the positive (+) or negative (-) terminal makes no difference in the valve’s operation. However, it’s essential to be aware that some valve units incorporate an additional ground wire.To determine if your valve has a ground wire, you’ll need to open up the connector.For valves with a ground wire, proper grounding is crucial.
SPECIFICATIONS
| Model | USS-YSV00323 | Size | 3/4 in |
|---|---|---|---|
| Valve Material | PA66 | Rated Voltage | DC 12V |
| Power Rating | 15 W | Flow Value | 7.6 Cv |
| Valve State | Normally Closed | Seal Material | NBR |
| Operating Temperature | -5 ~ 80 ℃ | Operating Pressure | 0.3-8 bar |
| Working Principle | Pilot | Suitable Media | Air, water, liquid, light oil |
| Outdoor Use | Yes | Flow Aperture | 20 mm |
| IP Grade | IP65 | Wiring Type | Junction Box |
Valve Attributes
Ingress - Protection Rating:
The valves have an ingress - protection rating of IP65. The first digit 6 indicates complete dust - tightness. The second digit 5 means protection against water jets from any direction. They are suitable for a variety of complex environments, effectively resisting the intrusion of dust and water to ensure reliable operation.
FAQ
1. What is the Waterproof Rating of this valve?
The motor's housing is rated at IP65 for ingress protection. If permanently installed outdoors, it is recommended to place it under a shelter or in a protective box to prevent prolonged exposure to rain.
2. Can these solenoid valves be used continuously for extended periods?
These valves should be energized for less than 8 hours. While most do not exceed 18W of power, the coils are in a contained area and can burn out if energized for too long. We recommend using a computer fan to keep the coil cool if continuous operation is necessary.
3.How long should you wait between two consecutive five-hour uses of our solenoid valve?
It is recommended to allow about 20 minutes of cooling time between two consecutive 5-hour operating sessions. The exact cooling time may vary depending on ambient temperature and operating conditions.
4.Can it be used outdoors?
While the solenoid valves have an IP65 rating, making them resistant to water spray, it is recommended to enclose the valve in a protective housing if permanently installed outdoors to ensure long-term durability.
Download user manual here.