Introduction
This U.S.Solid dual-channel independent control syringe pump is designed for high-precision micro-volume liquid transfer in laboratory applications. With a flow rate range from 0.764 nL/min to 52.95 mL/min, it supports syringe sizes from 5 μL to 60 mL. Each channel can work independently without affecting the other, allowing flexible and efficient liquid transfer. When used with external check valves and T-valves, this configuration can provide uninterrupted continuous liquid supply. It supports infusion, withdrawal, withdraw-then-infuse, infuse-then-withdraw, and cyclic infuse/withdraw operation. Featuring built-in and custom syringe configuration, this pump is an ideal solution for laboratories requiring precise, repeatable, and independent multi-channel liquid transfer.
Applications
Features
More Details
- Independent dual-channel design allows each channel to operate separately without affecting the other.
- Supports continuous liquid supply configurations when used with external check valves and T-valves.
- Supports precise flow rates from 0.764 nL/min to 52.95 mL/min for micro-volume liquid infusion and withdrawal.
- Compatible with syringe sizes from 5 μL to 60 mL, suitable for different laboratory applications.
Packing List
Syringe Pump *1, Power Cable *1, Syringe *2.
User Manual
For detailed information on installation, setup, and usage, please refer to the user manual.
Continous Liquid Supply Principle
Technical Data
| SKU | JFSP00016 | Model | USS-SP00016 |
| Pump Type | Dual-Channel Independent Control Infuse/Withdraw Syringe Pump | Channels | 2 |
| Linear Force | 90 N | Operating Modes | Infuse, Withdraw, Withdraw-then-Infuse, Infuse-then-Withdraw, Cyclic infuse/withdraw operation |
| Flow Rate Range | 0.764 nL/min - 52.95 mL/min | Compatible Syringe Size | 5 μL - 60 mL |
| Maximum Stroke | 140 mm | Stepping Resolution | 0.156 μm |
| Linear Speed | 7.94 μm/min - 79.4 mm/min | Accuracy | Error ≤±0.5% (when the stroke is at least 30% of the maximum stroke) |
| Display | LCD Display | Communication Interface | RS485 |
| Calibration Function | Supported | Syringe Selection | Built-in Syringe List & Direct Inner Diameter Input |
| Power Supply | AC 90V-260V/30W | Dimensions | 280 × 210 × 140 mm |
*To view the full table on mobile, please swipe left or right on the screen.
FAQ
1. Can I use syringes from brands that are not listed in the pump's built-in library?
Yes. The pump includes a built-in syringe list and also supports direct syringe inner diameter input, allowing users to work with compatible custom syringes.
2. What happens if the syringe becomes blocked during operation?
If a blockage is detected, the pump automatically stops and displays a "Stall" warning to protect the system. After the issue is resolved, the warning can be cleared and normal operation resumed.
3. Can this syringe pump be calibrated for better accuracy?
Yes. The pump supports calibration, helping improve dispensing accuracy for laboratory applications.
4. Will the pump save settings after power-off?
Yes. The pump includes a power-off memory function, allowing it to retain operating parameters after shutdown or power interruption.
5. Can this syringe pump be used for clinical or medical infusion?
No. This syringe pump is intended for laboratory research use only and is not suitable for clinical applications.