Electric Strapping Machine with 2pcs 4000mah Battery Powered for 1/2"- 5/8" PET Straps

Introduction

This efficient 3-in-1 electric strapping machine combines tensioning, welding, and cutting in a buckle-free design, significantly reducing labor, time, and material waste. Featuring an adjustable tensile force of 600N to 3200N and customizable fusion time, it versatilely handles paper, fabric, and building materials using PET straps (1/2" to 5/8" wide and 0.015"–0.047" thick). Powered by dual 4000mAh batteries, this cordless, portable tool fully charges in 90 minutes to deliver approximately 400 straps per battery. Engineered for long-term reliability, it boasts a powerful brushless motor and durable titanium alloy wear parts that significantly extend the machine's lifespan.

Features

• Automatic:Save time and labor with a machine that combines tensioning, cutting, and banding—no need for buckles or seals, improving efficiency.
• 2 x 4000mAh Batteries:Two rechargeable batteries provide approximately 400 strappings per full charge, with around 90 minutes of charging time.
• For PET Strapping:Compatible with 1/2-5/8 in wide, 0.4 to 1.2 mm thick PET (Polyester) strapping by replacing the spring and accessories.
• No Need For Buckles:Friction heat fusion welds the straps with 75% of their maximum load-bearing strength, ensuring they won’t break easily, eliminating the need for extra buckles.
• Adjustable:Welding time and tightening force (600-3200N) can be easily adjusted via knobs.
• Packing List:In addition to the main machine, two batteries, the battery charger and the user manual, an additional tool kit will be provided.

Precautions

1.Ensure the strap matches the spring installed in the machine

This electric strapping machine comes with a default spring for fusing PET straps (recommended U.S. SOLID PET strapping). For installation guidance, refer to the video or contact customer service.

2.Optimal welding time

Adjust welding time using the buttons to find the optimal setting before first use. Many factors, such as temperature and strap thickness, can affect the welding time.

3.Clean strap residue on the cutting gear

Avoid damaging the machine and yourself.

4.Strapping jams (LED in red)

If straps get jammed, switch off the power, cut the straps, remove the screws on the left and right panel covers, and clear the straps. Then, check for issues like dislodged lines on the travel switch and replace the micro switch if necessary.

5.Motor not rotating

Press the welding and tensioning buttons to check the motor and micro switch. Replace them if needed.