IP66/IP67 High Protection Speed-Variable Peristaltic Pump - Single Channel (0.005-1537 mL/min)

Introduction

MS106 is a speed-adjustable peristaltic pump designed for pharmaceutical and industrial applications. Compared with basic speed-adjustable peristaltic pumps, the MS106 stands out with its IP66/IP67 high protection level — dust-proof, resistant to strong water jets (IP66), and capable of withstanding short-term immersion in 1 m of water for 30 minutes (IP67), ensuring stable operation in harsh environments such as dust, humidity, weak acid and alkali, and salt spray. It also features a cast aluminum housing for enhanced durability, three-level user permission management, a time dispensing mode (with adjustable speed, run time, interval time, and cycle count), and a back suction function — ensuring security protection and precise control without worrying about parameter tampering. It supports multiple control modes, including RS485 communication control and external signal input control.

Features

• Compact & IP66/IP67: Compact cast-aluminum body with powder-coated finish — lighter, space-saving, and offering excellent heat dissipation and corrosion resistance. IP66/IP67 rating resists dust, strong water jets, and short-term immersion in 1 m of water for 30 minutes, as well as humidity and mild acid-alkali salt spray, ensuring long-term stable operation.
• Quick-Install Pump Head: Enables easier and faster hose replacement.
• Core Parameters:Flow range 0.005-1537 mL/min, speed range 0.1-350 rpm, speed accuracy ≤±0.2%.
• Servo motor drive: High-precision operation, high torque, low noise.
• 3-Level Access: Three-level user access management prevents unauthorized changes, meeting compliance-critical requirements.
• Time dispensing Mode: Allows setting of run time, interval time, and run cycles for simple dispensing tasks.
• Back suction function: Supports adjustable back suction angle. When the peristaltic pump stops, it prevents liquid from dripping from the tubing.
• External Control & Communication: Supports external control. Supports RS485 communication with Modbus protocol.

Ce Certified Quality & Safety

FAQ

1.What type of peristaltic pump is this?

As the most basic type of peristaltic pump, it supports core functions including speed adjustment, start/stop control, direction reversal, and full-speed operation. Additionally, the MS106 series offers a time dispensing mode, back suction function, and three-level user permission management.

2. What does "high protection" refer to?

The peristaltic pump has an IP66/IP67 rating. It is dust-proof, resistant to strong water jets (IP66), and capable of withstanding short-term immersion in 1 m of water for 30 minutes (IP67), enabling stable operation in harsh environments such as dust, humidity, weak acid and alkali, and salt spray for extended periods.

3.Does it support external control?

Yes. Please note that the buttons and knobs will no longer work after switching to external control mode. In this mode, only start/stop, direction reversal, and speed adjustment can be controlled externally; the timing function is not supported in external control mode.

4.What are the steps for connecting external control on the high-protection peristaltic pump?

• Turn off the power, unscrew the rear cover screws, and open the rear cover.
• Remove the cable port sleeve and install the waterproof gland.
• Connect the external control cable to the external control interface, pass the cable through the waterproof gland, and tighten it.
• Pass other wiring terminals through the waterproof gland one by one and tighten them.
• Close the rear cover, tighten the screws, power on the pump, enter external control mode, and complete the corresponding settings.

5.Does it have a timing function?

Yes, it supports timing functions. Specifically, in time dispensing mode, you can set run time (0.1–999.9, configurable in seconds/minutes/hours/days), interval time (0.1–999.9, configurable in seconds/minutes/hours/days), and number of cycles (0–50,000). The pump will stop automatically when the time runs out and can repeat according to the cycle settings.
Compared to basic speed-adjustable peristaltic pumps that also offer timing functions, this model additionally supports adjustable interval time and cycle count. However, it does not support scheduling by specific date or time.

6.What is "three-level user permission management"?

It allows you to enable three-level permission control in the system parameter settings, and then set separate passwords for Administrator, Technician, and Operator. Each level has different operational function permissions.

7.Which types of tubing are compatible with this peristaltic pump? Are they included in the package?

The compatible tubing models include 13#, 14#, 19#, 16#, 25#, 17#, and 18#. When you purchase this product, one piece of each 13#, 16#, and 17# tubing (2 meters per piece) will be included. Below is the information for common-sized tubing:

8.Does it have a anti-drip setting?

Yes, this peristaltic pump is equipped with a basic anti-drip (suck-back) function. When the pump stops working, the motor will rotate in the reverse direction by a certain angle to suck back the liquid in the tubing and prevent dripping. Users can set the suck-back angle (0°-720°) in the system parameters—setting the angle to 0° will disable this function. Meanwhile, the suck-back speed can be adjusted to meet the suck-back needs of liquids with different viscosities.

9.Does it support flow calibration?

No.