Compact Peristaltic Pump with Timer - Speed-Adjustable Single/Dual/Triple Channel (10-Rroller, 0.0002-48 mL/min)

Introduction

The BT100N is a stepper motor-driven basic peristaltic pump offering a speed range of 0.1-150 RPM. Compatible with AMC series pump heads featuring an internal 10-roller design, it provides single/dual/triple channel configuration options with a flow rate range of 0.0002-48 mL/min. This compact unit includes timer functionality and comes in a durable powder-coated metal enclosure with membrane buttons for start/stop, direction reversal, and timer operation. The pump supports seven external control modes and features RS232/RS485 communication interfaces (Modbus RTU protocol) for seamless integration with computers, and PLCs, enabling remote control. Ideal for university laboratories, research institutes, and analytical instrumentation applications.

Features

• AMC Pump Head: Card-style design with 10-roller structure, ideal for low-volume liquid transfer, widely used in analytical instrument applications.
• Flow Range: Two options—0.0053-645 mL/min & 0.18-270 mL/min (requires tubing with 1.6mm/2.4mm wall thickness).
• LED Screen: Displays speed. Easy button speed adjustment (0.1-150 RPM).
• Metal Powder-Coated Housing: Compact & durable.
• Stepper Motor: Low noise & vibration.
• Communication: RS232 & RS485 (Modbus RTU protocol).
• Features: Reversible flow, timer, one-key drainage.
• Flexible Control Options: Supports multiple external control methods

Precautions

1.Screen does not light up when the switch is turned on

Check if the power cable is properly and securely connected./Confirm that there is power supply./Check if the fuse is damaged.

2.Pump head does not rotate when the start button is pressed

Check if the pump head screws are tightened./Check for any foreign objects blocking the pump head rollers./Check if the roller bearings are severely corroded and unable to rotate (check after power off)./Confirm if the machine is in external control mode (refer to external control instructions).

3.No fluid transfer during operation

Check if the hose installed is compatible with the pump head./Confirm if there is enough fluid at the inlet (fluid level above the pipe inlet)./Check if there is any damage or leakage in the pipe and replace or seal it./Check if any solid material is blocking the pipe.

4.Actual fluid output does not match the preset value

Check if the hose settings for the pump head match the actual installation and usage./If using external control, confirm if the external control signal is complete or has attenuation.