Skip to product information
NaN of -Infinity

U.S. Solid

1/4" Solenoid Valve - 12V DC Brass Electric Solenoid Valve Normally Closed, VITON Seal

1/4" Solenoid Valve - 12V DC Brass Electric Solenoid Valve Normally Closed, VITON Seal

SKU: Product SKU: JFSV00051

1534 in stock

Regular price $12.99 USD
Regular price Sale price $12.99 USD
Sale Sold out
Shipping calculated at checkout.
 More payment options
View full details
U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with one-quarter inch (1/4") female threaded (NPT) connections, and heat and oil resistant Viton seals. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. The solenoid valves have a rating of IP65, which means they can withstand spray from water. However, if permanently installed outdoors, it is recommended that you enclose the valves in some protective housing. Not for use underwater. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank.

Specifications
Pipe Size: 1/4"
Flow Aperture: 2.5 mm
Body Material: Brass
Gasket / Diaphragm / Seal: VITON
Operation Type: Direct Lift Valve
Operation Mode: Normally Closed
Voltage: DC 12V ± 10%
Power rating: 14W
Suitable Media: Air, water, oil, Diesel fuel, kerosene etc.
Operational pressure range: Air/Water/Diesel fuel/kerosene: 0-7 Bar (0 to 101 PSI); Oil: 0-5 Bar(0 to 72 PSI)
Flow capacity: 0.23 gallons per minute (GPM) of water at 60 oF with a pressure drop of 1 PSI
Flow value: 0.23 Cv
Temperature, Minimum: 14 degrees Fahrenheit (-10 degrees Celsius)
Temperature Maximum: 248 degrees Fahrenheit (120 degrees Celsius)
Also available with Stainless Steel body: Item #USS2-00065.
45-PACK Version: USS-SV00300

OVERHEATING WARNING: Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 176°F (80°C), which is fully complied with national standard: JB/T7352-2010. If energized continuously for more than 8 hours the coil may burn.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Instruction Manual

Customer Reviews
5.0 Based on 46 Reviews
5 ★
96% 
44
4 ★
4% 
2
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
CW
01/26/2025
Chase W.
US US

Works but use caution

WARNING: for those using this with Propane, make sure it is downstream of your regulator! It is not rated for tank pressure. Almost made this mistake. It functions well so far. Read more

JS
01/04/2025
John S.
US US

Works

Hope it lasts Read more

A
11/04/2024
Anonymous
United States United States
I recommend this product

Worked good

They seem good quality

A
09/05/2024
Anonymous
United States United States
I recommend this product

Full shut off valve

Did what it was supposed to do

T
04/10/2024
Trev
US US

Simple and reliable

I��m using this on an AirLift company Wireless one manifold (along with an external compressor/tank setup). Works very well, even while being cycled open/close several times quickly while the manifold gets my airbags to the right pressure. Read more