Product Description
Note: This machine can't be used with a plug, it need a wire to connect the machine to power line directly, the cross-sectional area of power line must be larger than 6 square millimeters.
The default product shell will be black, not the off-white color in the picture. If you have any color requirements, please contact us.
Our high-frequency induction heaters are used to heat various metal objects in a non-contact state, concentrating the heating at the necessary location to achieve instant heating, which can save energy, protect the environment and improve efficiency.
There is no flame, no gas, and no heat radiation during operation, so that operators have a more comfortable and environmentally friendly working environment.
SPECIFICATIONS
Brand: U.S. SOLID
Model: USS-HFIH00021
Power Supply: Three phase 380V or 480V
Output Power: 80kW
Turns Ratio (ratio of primary coil turns to secondary coil turns): 18:1
Total Coil Length: 300-800mm
Frequency: 30-80kHz
Output Current: 400-3200A
Maximum Heating Temperature: up to 1800℃ / 3272℉ (depending on the workpiece and coil material)
Circuit Breaker Current Protection Point:: 40 A
Time Setting: 1-99 seconds
Cooling Water: 0.15-0.25MPa 60L/min, (the recommended parameters will have the best cooling effect, while others may also be feasible, please contact us first)
Minimum Cooling Water Temperature: 26℃ / 78.8℉ (to prevent excessive temperature difference with the environment, causing condensation in the water pipe and the formation of water droplets)
Cooling Water Temperature Protection Point: 40℃ / 104℉
Handheld Cable Length: 5m
Gun Head Weight: 1.2kg
OTHER MODELS
Induction Heaters |
||||
Output Power |
Turns Ratio |
Power Supply |
Non-handheld Type |
Handheld Type |
15kW |
16:1 |
Single Phase 110V or 220V |
||
16:2 |
Single Phase 110V or 220V |
|
||
25kW |
18:1 |
Three Phase 380V or 480V |
||
18:2 |
Three Phase 380V or 480V |
|
||
35kW |
18:1 |
Three Phase 380V or 480V |
||
40kW |
18:1 |
Three Phase 380V or 480V |
||
60kW |
18:1 |
Three Phase 380V or 480V |
||
80kW |
18:1 |
Three Phase 380V or 480V |
||
Accessories |
||||
Model |
Description |
|||
M8 Screw Nut |
||||
6mm Copper Pipe |
||||
8mm Copper Pipe |
||||
Foot Pedal Switch |
SELECTION INSTRUCTIONS
Other Details
One Year Warranty!Product Videos
Videos Hide Videos Show Videos
-
How to Use an U.S. Solid High-Frequency Induction Heater ?
For more details, please refer to https://ussolid.com/u-s-soli...
-
Introduction of U.S. Solid High-Frequency Induction Heater USS-HFIH00001
For more details, please refer to https://ussolid.com/u-s-soli...
-
Heat Metal In Seconds With The Amazing Induction Forge - Metal Working Tools You Need
Ive wanted an induction forge for a long time, after setting t...