- Cuts tape widths from 0.12" to 0.98" (3 to 25mm), tape lengths from 0.6” to 2.76”(15 to 70mm)
- Accepts any core diameter tapes, the outside diam of tape roll can up to 5.9” (150mm)
- You can choose from three different dispensing modes according to your job demands: automatic mode, semi-automatic mode and preset mode
- Tape length and cut-piece spacing can be set vary with tape type and condition. It is ideal for muti-operator applications, high efficiency
- Suitable for a variety of adhesive tapes, including high temperature tape, goldfinger tape, scotch tape, acetate cloth, glass cloth, aluminum foil, cellophane tape, masking tape, polyethylene, vinyl tape, teflon tape, mylar tape and etc. Non-adhesive tape and strong adhesive tape are not recommended, such as double-sided tape and fiber tape.
Technical Specification
Applicable Tape Width: 3-25 mm (0.12 to 0.98 inches)
Tape Length Setting Range: 15-70 mm (0.6 to 2.76 inches)
Inner Diameter: No limits
Max. Outside Diameter of Roll: 150 mm (5.9 inches)
Accuracy of Cutting Length: ±0.5 mm
Voltage: AC 110 Volt, 60 Hz or AC 220 Volt, 50 Hz
Power: 25 Watt
Net Weight: 1.9 kg (4.2 lbs)
Product Dimensions: 126 x 150 x 258 mm (4.9 x 5.9 x 10.1 inches)
3 Dispensing modes
Automatic Mode:
Press and hold Start Button until blue light is on.
Move the MOVABLE SENSOR to the desired position.
Press the Start Button to start dispensing.
When the tape blocks the MOVABLE SENSOR, the dispenser will stop.
Removing the tape over the MOVABLE SENSOR will restart the dispenser.
Semi-automatic Mode:
Press and hold Start Button until purple light is on.
Move the MOVABLE SENSOR to the desired position.
Press the Start Button to start dispensing.
When the tape blocks the MOVABLE SENSOR, the dispenser will stop.
Pressing the Start Button will restart the dispenser.
Preset Mode:
Press and hold Start Button until red light is on.
Press the Start Button to start dispensing.
The dispenser will stop when the selected number of cuts has dispensed.
If you want to peel the backing paper from a tape roll, you'll need to use the tape dispenser with a liner remover. Click here to purchase the liner remover.
|
SKU |
Model |
Tape Width |
Tape Length |
Inner Diameter |
Max. Outside Diameter |
non-adhesive tape |
adhesive tape |
|
JF-2000 |
0.28” to 1.96” |
0.79” to 39.33” |
1"/1.25"/3" |
5.91" |
× |
√ |
|
|
Zcut-2 |
0.12" to 0.87" |
0.43" to 2.32" |
1"/1.25"/3" |
5.1" |
× |
√ |
|
|
JF-8000 |
0.12" to 0.98" |
0.2" to 2.36" |
no limit |
5.91" |
× |
√ |
|
|
JF-5000 |
0.12" to 0.98" |
0.6” to 2.76” |
no limit |
5.91" |
× |
√ |
|
|
JF-3000 |
0.25” to 2.36” |
0.2” to 39.33” |
no limit |
11.8" |
√ |
√ |
|
|
JF-7000 |
0.25” to 2.36” |
0.2” to 39.33” |
no limit |
11.8" |
√ |
√ |
|
|
JF-9000 |
0.25” to 2.36” |
0.2” to 39.33” |
no limit |
11.8" |
√ |
√ |
|
|
JF-6000 |
0.32” to 3.15” |
0.79” to 39.33” |
no limit |
11.8" |
√ |
√ |
|
|
JF-6000-150MM |
0.59" to 5.90" |
0.79” to 39.33” |
no limit |
11.8" |
√ |
√ |
|
|
USS-ZCUT13 |
0.79” to 7.87” |
0.79” to 39.33” |
3" |
11.8" |
√ |
√ |